Page 683 - 2006 HARLEY FLSTCI SERVICE MANUAL

Figure 2-44. Truing Rim Radially

d0477x2x

RADIAL TRUING See Figure 2-44. Adjust truing stand gauge to the rim’s tire bead seat as shown. The rim should be trued within 0.031 in. (0.79 mm). Spin the rim slowly. If the rim contacts the gauge on or near a marked group of spokes, loosen the spokes in the marked group on the opposite side of the rim. Now tighten the spokes in the group where the rim makes contact. Loosen and tighten spokes an equal number of If the rim contacts the gauge between two marked groups, loosen the spokes in both opposite groups and tighten the spoke groups on the side of the rim that makes contact. When the wheel is centered and trued, start at the valve hole and tig

HOME 1. 2. turns. 3. 4. 5. 6. 2-34