Page 691 - 2006 HARLEY FLSTCI SERVICE MANUAL

5/32 in. (4 mm) thick cardboard insert Carefully inspect all parts for wear or damage and Inspect the piston bore in the master cylinder housing for scoring, pitting or corrosion. Replace the housing if any Inspect the outlet port that mates with the brake line fit- ting. As a critical sealing surface, replace the housing if Inspect the cover gasket for cuts, tears or general deteri-

Groove Figure 2-55. Cardboard Insert replace as necessary. of these conditions are found. any scratches, dents or other damage is noted. oration. Replace as necessary.

d0325x8x

3. 4. 5. 6.

11WARNING 1WARNING Wear safety glasses or goggles when removing or install- ing retaining rings. Retaining rings can slip from the pli- ers and could be propelled with enough force to cause Remove retaining ring (18) from pivot pin groove at bot- Remove pivot pin (15) and brake hand lever (17). Carefully remove wiper (2) with pick or similar tool. Remove piston (5) with O-ring (4) and primary cup (6). CAUTION Do NOT allow dirt or debris to enter the master cylinder reservoir. Dirt or debris in the reservoir can cause improper operation and equipment damage. (00205b) Remove both screws (13), cover (11) and the cover gas- CLEANING AND INSPECTION

serious eye injury. (00312a) tom of master cylinder bracket. Remove piston cap (3). Remove spring (7). 45006-96C). serious injury. (00291a) sages in bottom of reservoir. 2006 Softail: Chassis

HOME 5. 6. 7. 8. 9. 10. 11. ket (10). (00278a) 1. 2. 2-42