Page 695 - 2006 HARLEY FLSTCI SERVICE MANUAL

2.17

1

4

REAR BRAKE MASTER CYLINDER/RESERVOIR
3
Steel/rubber washers (2) 3

2 Figure 2-59. Rear Brake Control: Front Mount Figure 2-60. Rear Brake Control: Rear Mount

Banjo bolt Brake line Nut 2 Cotter pin Washer Clevis pin
4 1 Push rod pin

7548 1. 2. 3. 4. 7549 1. 2. 3. 4.

THREADLOCKER steel/rubber washers on WHEEL BEARING GREASE (Part

CAUTION Damaged banjo bolt surfaces will leak when reassembled. Prevent damage to seating surfaces by carefully removing CAUTION D.O.T. 4 brake fluid will damage painted and molded-in color surfaces it comes in contact with. Always use cau- tion and protect surfaces from spills whenever brake work is performed. Failure to comply can result in cos- See Figure 2-59. Remove banjo bolt (1) and two steel/ rubber washers (2) to disconnect brake line from master Remove nut (4) to free assembly from mounting bracket. See Figure 2-60. Remove cotter pin (1) and washer (2) from clevis pin (3). Remove master cylinder assembly If disassembling ma

REMOVAL brake line components. metic damage. (00239a) cylinder. Discard washers. from brake pedal. INSTALLATION brass drift. before assembly. (00322a) new Lubricate BRAKE FLUID. Position new 30 Nm). Grease fitting with around edges of brake lever. 2006 Softail: Chassis

HOME 1. 2. 3. 4. 1. 2. 3. 4. 5. 6. 7. 2-46