Page 699 - 2006 HARLEY FLSTCI SERVICE MANUAL

Figure 2-64. Compress Spring and Retaining Ring

the sealing surface from damage. serious eye injury. (00312a) groove of cartridge body bore. and that push rod rotates freely.
NOTE The push rod, clevis and spacer washer are a one-piece See Figure 2-64. Stand cartridge body upright on banjo sealing surface. Lay down a clean shop cloth to protect 11WARNING 1WARNING Wear safety glasses or goggles when removing or install- ing retaining rings. Retaining rings can slip from the pli- ers and could be propelled with enough force to cause Insert ball end of push rod into piston cup. Pushing down on push rod to compress spring, fit captured spacer washer into cartridge body. Further compressing spring as necessary, install retaining ring positioned in step 4 in Verify that reta

s0370x2x assembly. 4. 5. 6. 7.

CLEANING AND INSPECTION

11WARNING 1WARNING Use denatured alcohol to clean brake system compo- nents. Do not use mineral-based solvents (such as gaso- line or paint thinner), which will deteriorate rubber parts even after assembly. Deterioration of these components can cause brake failure, which could result in death or Clean all metal parts, except the cartridge body assem- bly, and blow dry with compressed air. Clean all rubber Inspect the reservoir adapter bore for scratches. Replace the reservoir if scratches are present. Check the dust boot for cuts or tears. Replace as neces- Inspect the threads on the cartridge body and push rod. Replace part if threads are dam

serious injury. (00291a) parts using denatured alcohol. necessary. are scratched. cover until free. clean brake fluid. ASSEMBLY side of cartridge body. ring groove. 2006 Softail: Chassis

HOME 1. 2. 3. sary. 4. 5. 6. 7. a. b. c. d. 1. a. b. c. 2. 3. 2-50