Page 703 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 703

3









                           2                                 Figure 2-68. Removing Pistons  1     2          Figure 2-69. Crossover O-rings and   Inside Housing
                                                  Low pressure air hose  (Part No. HD-43293-A)         Crossover O-rings (2)  Pistons (2)



                          1                         Bridge bolt (12 pt/10 mm) Brake caliper piston remover



              d0555x2x                            1.  2.  3.          7394  1                          1.  2.





                      Wear









                11WARNING 1WARNING Compressed air can pierce the skin and flying debris from compressed air could cause serious eye injury.  safety glasses when working with compressed air. Never use your hand to check for air leaks or to determine air  See Figure 2-68. Remove pistons. Place BRAKE CALIPER PISTON REMOVER (3) (Part No. HD-43293-A) between caliper housings.  Insert two bridge bolts (2) (12 pt/10 mm) and tighten If the bleeder valve was removed, loosely reinstall or place a gloved finger over the bleeder valve hole on the outside caliper housing. Apply low pressure compressed air (1) to banjo bolt hole to remove pistons from caliper bores. Remove bridge







                            flow rates. (00061a)  securely.         completely remove.     Discard all removed parts.                                             2006 Softail: Chassis





          HOME                  3.  a.   b.   c.    d.   e.   4.  5.                 6.                                                                          2-54
   698   699   700   701   702   703   704   705   706   707   708