Page 707 - 2006 HARLEY FLSTCI SERVICE MANUAL

2.19

7
6
9 Coat the outside diameter of lower

1 8
4 Figure 2-73. Front Brake Caliper: FLSTSC mounting bolt (6) with Dow Corning MOLY 44 light Place caliper mounting plate, with disc pad, on disc. NOTE See Figure 2-74. The Springer brake bracket has a cast-in Position the caliper with the disc between the friction pads. Side caliper mounting plate into brake caliper from the rear. Be sure that the spring clip on the caliper mounting plate is properly positioned in the brake caliper. See Figure 2-73. Place flat washer (8) on upper mount- ing bolt (7), then insert the bolt through the bracket holes and the mounting plate. Scr

Banjo bolt washers (2) grease (Part No. 94674-99). Install brake caliper (5) on brake disc. nub that engages a hole in the mounting plate.

2 Lower mounting bolt Upper mounting bolt
Brake line Banjo bolt Caliper Spring pin bushing.
3 Figure 2-73.
5 Bleeder valve Flat washer
FRONT BRAKE CALIPER: FLSTSC
s0372x2x 1. 2. 3. 4. 5. 6. 7. 8. 9. Installation See 1. 2. 3. 4. 5.

FRONT BRAKE CALIPER NOTE The FLSTSC and FXSTS use the same front brake caliper. See 2.20 FRONT BRAKE CALIPER: FXSTS for all disassem- bly, cleaning, inspection and assembly information. CAUTION Damaged banjo bolt surfaces will leak when reassem- bled. Prevent damage to seating surfaces by carefully removing brake line components. CAUTION D.O.T. 4 brake fluid will damage painted and molded-in color surfaces it comes in contact with. Always use cau- tion and protect surfaces from spills whenever brake work is performed. Failure to comply can result in cos- metic damage. (00239a) See Figure 2-73. Remove banjo bolt (2) and two steel/ rubber

HOME Removal 1. 2. 3. brake line. do steps 4 through 6. 4. (7). 5. 6. removal. 7. FXSTS. 2-58