Page 698 - 2006 HARLEY FLSTCI SERVICE MANUAL

s0368a2x 2-49

Figure 2-62. Removing Clevis Figure 2-63. Removing Cartridge 2006 Softail: Chassis

f2054x2x

Push on threaded end of cartridge

NOTE Do not disassemble the cartridge body. The cartridge body components are not sold separately, so if piston seal leakage is evident, replace the entire cartridge body assembly. Thoroughly clean exterior of master cylinder assembly Stand master cylinder assembly upright on banjo sealing surface. For best results, suspend reservoir over edge of table. Be sure to lay down a clean shop cloth to protect 11WARNING 1WARNING Wear safety glasses or goggles when removing or install- ing retaining rings. Retaining rings can slip from the pli- ers and could be propelled with enough force to cause See Figure 2-62. Push down on large flat washer to com-

DISASSEMBLY with denatured alcohol. the sealing surface from damage. serious eye injury. (00312a) spring retainer from dust boot. Figure 2-63. dirt and grease. grooves. attached. Discard retaining ring.

HOME 1. 2. 3. bly. 4. See 5. 6. 7. 8.