Page 892 - 2006 HARLEY FLSTCI SERVICE MANUAL

s0231x3x 3-105

1

3 2 2006 Softail: Engine

5

2
5
2 Figure 3-138. Crankshaft Bushing Reamer (Part No. HD-42316) and Handle/Drive Socket (Part No. HD-43645)
1
3
Handle/drive socket Reamer Right crankcase Roller bearing 4

Pilot
half
7454 4 7455
1. 2. 3. 4. 5.

Turn cam support plate over so that secondary cam

chain side is facing upward. Start new bushing into bore with the knurled edge top- side. Be sure that hole in bushing is aligned with oil hole in bushing bore. CAUTION If the crankshaft bushing is pressed in from the primary cam chain side, or from the secondary cam chain side with the knurled edge of the bushing down, the bushing bore will be damaged. Damage to the bore requires replacement of the cam support plate. Center crankshaft bushing bore over support tube. Insert installer side of driver into bushing. Press on driver until collar of tool makes firm contact with cam support plate. Ream the crankshaft bushing following the directions

HOME 3. 4. 5. 6. 7. 8. below. PART NO. HD-42316 HD-43645 disassembly. 1. case flange. 2. 3. a. b. c. d.