Page 894 - 2006 HARLEY FLSTCI SERVICE MANUAL

3-107
3
3
4
5
2 7
Figure 3-140. Camshaft/Camshaft Bearing
1
Remover/installer (Part No. HD-43644) 6 Figure 3-141. Camshaft Bearing Removal

2 1 2006 Softail: Engine

Camshaft driver Support block Bearing pilot/driver Parallel blocks 4 2 Forcing screw Bolt with flat washer Wedge attachment Hardened plug Bearing Camshaft 5

Ram
5 d0203a3x Bridge d0205x3x
1. 2. 3. 4. 5. 1. 2. 3. 4. 5. 6. 7.

If reusing front camshaft, remove WEDGE ATTACHMENT (Part No. HD-

1WARNING 1WARNING Wear safety glasses or goggles when removing or install- ing retaining rings. Retaining rings can slip from the pli- ers and could be propelled with enough force to cause Remove retaining ring from groove at end of front cam- Remove four T20 TORX screws to free bearing retainer plate from inboard side of cam support plate. Using a colored marker, mark one of the links of the sec- ondary cam chain. Maintaining the original direction of rotation during assembly may prolong service life. See Figure 3-140. With primary cam chain side facing upward, place cam support plate on parallel blocks (5) CAUTION Since the bearing fit to the

serious eye injury. (00312a) shaft. Discard retaining ring. under ram (4) of arbor press. Figure 3-141. bearing using 95637-46A). ber of turns. bridge.

HOME 2. 3. 4. 5. procedure. 6. plate. 7. See 8. a. b. c. d.