Page 29 - New Catalogue 2012.indd
P. 29
D eyelet
D eq
(d + D )
2
2
D hole = D + 0,2mm
d
eq
D eyelet = D hole + 0,6mm
D
Hitaltech D eq = RoHS 29
D hole
PCB HOLE
PIN DIMENSIONS
A group of connecting technologies 2002/95/EC www.hitaltech.com
STH R���� (T������ H���)
STH terminal blocks and headers are suitable to be soldered with Refl ow technology as the
plas� c housing has been moulded using a 270°C stable material.
Diff erently to SMD tradi� onal components, the pins of the male headers and terminal blocks
are inserted into PCB metallized holes fi lled with soldering paste which are then soldered using
Refl ow Technology. � d 2 . S
.
4 f
doctor terminal
Stencil Plate paste
PCB
Metallized Hole
1 Stencil plate positioning 2 The soldering paste is 3 Once the stencil plate 4 The pin insertion drags 5 Passage in the oven and
on the PCB. deposited on the eyelets is removed, the paste part of the paste through paste’s refl ow through fl ow through fl
by means of a Doctor. remains in the hole. t t the hole, till it overflhe hole, till it overflhe hole, till it over ows. fl ows. fl the metallized hole.
The through hole pin gives a high mechanical resistance to the stresses on the solder joint
Sauro by the law - status: 2.3 www.sauro.net - info@sauro.net
caused by the wire inser� on and screwing force.
STH components are also compa� ble with “Pick and Place” automated moun� ng robo� cs
and can be packaged in tubes, taped on reel and trays.
Hitaltech STH products are produced with insula� ng material which can withstand up to
270°C peak temperatures. The plas� c material is UL94 V-0 self ex� nguishing and is halogens
free.
When exposed to high temperature, the material used in the terminal block has similar
characteris� cs as that used in the PCB and therefore during the refl ow soldering there is
no permanent deforma� on.
Hitaltech SA/NV Hitaltech UK Ltd Hitaltech Gmbh Hitaltech Corp. Japan Hitaltech Headquarters
(Sales Benelux, France & Italy) (Sales UK & Eire) (Sales Germany) (Sales Asia) (Sales for the Rest of the World)
T: +32 2725 2075 T: +44 (0) 1253 899910 T: +49 (0) 351 65 57 39 10 T: +81 (0)467 23 81 00 T: +32 2725 2075
E: europe-sales@hitaltech.com E: uksales@hitaltech.com E: de-verkauf@hitaltech.com E: japan-sales@hitaltech.com E: europe-sales@hitaltech.com