Page 9 - Signage Specification 26-04-13
P. 9
5.3.2 “COLLECT”
Fret cut individual letters glued to the counter end wall
above the collect point to read COLLECT to be
finished white RAL 9016.
Font to be SWIS 721 BT, 70mm high letters. These
letters should be mounted touching both the white
underline and white vertical line.
White line is NOT supplied by the main sign contractor.
NOTE: It is quite possible that the wall to take COLLECT
may not be ready when the main signage is installed. In
this case, by arrangement with the main contractor, it is
acceptable to leave the individual letters on site to
be installed by the shopfitter. HOWEVER THIS
MUST BE AGREED ON SITE BETWEEN THE TWO
PARTIES.
NOTE THAT THE PHOTOGRAPH ABOVE IS INDICATIVE ONLY. IT SHOWS THE LETTERS INCORRECTLY
POSITIONED, WITH GAPS BETWEEN LETTERS AND LINES.
5.4 Black line
A self adhesive, 20mm wide, black vinyl line that
runs from the WELCOME sign to the COLLECT
point. This line is to pass through the sneeze
screen and link all monitor surrounds, in black.
Supplied and installed by the main sign contractor.
However where it reaches the COLLECT wall, the
line changes from Black to White and is printed
into the vinyl graphic wallpaper.
White line is NOT supplied by the main sign contractor. 
