Page 4 - Signage Specification 26-04-13

3.1.2 To the face of the fascia panel apply a built‐up tile logo, text and strap line with 65mm
returns all round ( except the strap line which has 30mm returns) constructed from
aluminium, white powder coated to RAL 9010, inside and out, with 5mm 069 translucent
white acrylic faces. Letter backs to be white sprayed aluminium.

3.1.3 The face of the tile logo is to be decorated with 5‐7 year vinyls to translucent blue
Mactac 9738‐05 and translucent red Mactac 9758‐06. Vinyl is to be stencil cut to show the
white dice dots through. White 5mm border all round, equal to the gap between the red and
blue vinyls.

3.1.4 Logo and “Domino’s” text are to be evenly illuminated by LED modules with all wiring
and drivers unseen.

3.1.5 The strap line remains unlit in all cases.

3.2 Non‐Internally Illuminated Fascia’s

Where a planning consent requires other than internally illuminated individual letters, then
one of the following specifications should be used, as appropriate to the particular consent
requirements:

3.2.1 Non‐Internally Illuminated Letter & Logo Construction

To the face of the fascia panel apply a built‐up tile logo, text and strap line with
30mm returns all round including the strap line. Constructed from aluminium, white
powder coated to RAL 9010, both inside and out, with 5mm 069 translucent white
acrylic faces. Letter backs to be white aluminium.

Additionally, apply a white strap line 50mm wide with 30mm returns, otherwise
constructed as the logo and lettering.

The face of the tile logo to be decorated with 5‐7 year vinyls to dense blue Mactac
9839‐24 and dense red Multi Fix 7911.
The vinyl is to be stencil cut to show white dice dots through. White 5mm border all
round to equal the gap between the red and blue vinyls.

This font and the tile logo are obtainable only from Domino’s Property Department –
See Section 1, above.