Page 3 - Signage Specification 26-04-13

The Principal Contractor must arrange for suitable power supplies to all signage. All cables must be
concealed from view.

2.2 Setting Out Guidelines

In order to create the right proportions between the lettering and logos on different heights
of fascias, the following guidelines on setting out have been developed. In some cases the
dimensions below may not be appropriate and you must always refer to the approved
signage drawings for confirmation. Otherwise please contact the Design Team in Domino’s
Property Department for clarification.

General setting out

Distance between logo and lettering 50mm

Distance between bottom of logo and lettering to strap line 50mm

Strapline to be positioned at the bottom of the fascia board

Lettering and logo setting out

Height of fascia Distance between top of fascia Distance between top of fascia to
to highest point of tile logo the top of the ‘’i’’ in Dominos.

Band A – 500mm to 800mm 50mm 100mm

Band B – 800mm to 1000mm 100mm 200mm

Band C – 1000 to 1200mm 150mm 300mm

For fascia’s above 1200mm, or less than 500mm, please refer to project drawings for specific details.

3.0 External Signage Construction Specifications

3.1 Internally Illuminated Fascias

Internally illuminated, built‐up individual letters and logo are always the preferred option for
fascia signage. These will normally be mounted on an aluminium back panel, unless the local
Authority requires timber. This will be specified on the Planning Consent and DP drawings.

3.1.1 2mm aluminium back panel formed on four sides with 25mm folded returns complete
with 20mm x 20mm internal aluminium fixing angle to top and bottom or 20mm up and
downstands depending on circumstances. Panel is to be etch primed and powder coated
semi‐gloss grey to match RAL 7043 Traffic Grey.
Install to a sealed and weathered area provided by others.