Page 7 - Signage Specification 26-04-13
P. 7

2.2.3  To the face of each panel is applied the tile logo to dense red Multi Fix 
                        7911 and dense blue Mactac 9839‐24 on white leaving a 5mm white 
                        border all round, together with white “Domino’s” vinyl letters. 

 
              2.2.4 Illumination by 2no. 80mm diameter extruded aluminium trough lights 
                        illuminated by LED power modules. Trough light modules are to be 
                        guaranteed for 2 years 
                                                      

            2.3 Externally Illuminated Timber Projecting Sign 

            2.3.1        Projecting sign having panels sized as shown on project drawing. 
             
            2.3.2         Panel constructed from 25mm exterior grade plywood with 25mm x 
                         12mm timber mouldings all round, fitted to an aluminium support 
                         frame/bracket, all painted RAL 7043 Traffic Grey.  

                         Please note that the design of the support/bracket may vary as part of 
            2.3.3        the planning consent and this should be checked for each project. 

                         Stand‐off of the sign from the wall to the edge of the projector is to be 
            2.3.4        125mm. 

                         To the face of each panel is applied the tile logo to dense red Multi Fix 
            2.3.5        7911 and dense blue Mactac 9839‐24 on white leaving a 5mm white 
                         border all round, together with white “Domino’s” vinyl letters. 

                          Illumination by 2no 80mm diameter extruded aluminium trough lights 
                         illuminated by LED power modules.’ Trough light LED modules are to be 
                         guaranteed for 2 years 

5.0   Internal Signage 

There are number of internal signage elements. However please note that although they are 
included here for completeness, some are specific bespoke items and not all will be provided by 
the project main sign contractor. 

         5.1    Shopfront Window poster frames 

            2No.  A1  size  LED  illuminated  poster  boards  should  be 
            installed  in  every  shopfront,  immediately  adjacent  to  the 
            customer door, on the opening side. Window poster frames 
            are  supplied  by  Olympic  Signs.  The  Main  Contractor  is  to 
            install,  using  the  foot  (screw  into  floor)  and  head  (fix 
            through  ceiling  into  independent  support  above)  fixings 
            supplied.  Principal  Contractor  to  provide  power  supply  as 
            required. 

            Note  that  a  minimum  of  1000mm  clearance  is  required 
            between the window frame and any other obstruction. 

These frames are NOT supplied by the main signage contractor. 
   2   3   4   5   6   7   8   9   10