Page 7 - Demo
P. 7
the direction of forward travel. Make sure the cables are in order across the tool bar. Check to make sure the cables will not be damaged during operation. Tie all the cables down with plastic wire ties.Sensor Installation: The sensors are mounted on each planter shank near the bottom of the seed delivery tubes. Route each sensor cable to the harness and tie it down to prevent damage to the sensor cable during operation.System OverviewBracketAlarmKnobSun ShieldPage 7Cable to Harness NetworkPower from Battery & Radar ConnectionWhen starting the monitor press the dial in and release. If you hold the dial in for long then 10 seconds on start up you will reset to default values. To turn the monitor off press the dial in for 5 seconds and the monitor will turn off.The Selector Dial: Turn the dial to highlight the option you want. Push the selector dial in once to select that option.
