Page 223 - CRESTRON HOME OS-3

Double

To assign a media function to a double button press (double tap), tap the Double button and
then select a media function.

Tap the gear button next to the location button to configure the double tap settings for the
keypad.

l Use System Settings: Tap the check box next to Use System Settings to use the delay that
is set by the system. For details, refer to Keypad Settings (on page 296).
l Wait For Double Tap: Available when Use System Settings is not checked. Tap the check
box next to Wait For Double Tap to enable the wait for double tap function. The Wait for
Double Tap function determines if the Crestron Home system triggers the Tap button
action or the Double Tap button action. The delay is the amount of time (in seconds) that
the system waits after a button press to determine if a subsequent button press is a
double tap. The values can be set between 0.2 and 1 second.

For example:

o Tap button action is set to route video to a bedroom.
o Double Tap button action is set to route audio to a bedroom.
When Wait for Double Tap is enabled:

NOTE: The Tap button action is not triggered if the button is pressed twice within the
delay time.

o A single button press will route video to the bedroom if the room is off (Tap button
action).

Product Manual — Doc. 8525Z Crestron Home™ OS • 223