Page 224 - CRESTRON HOME OS-3

o Two button presses will route audio to the bedroom (Double Tap button action).
When Wait for Double Tap is disabled:

NOTE: The Crestron Home system registers both the single and double button presses
and triggers both actions.

o A single button press will route video to the bedroom if the room is off (Tap button
action).
o Two button presses will route video to the bedroom if the room is off (Tap button
action) and then will route audio to the bedroom if the room is off (Double Tap
button action).

l Hold Time: Available when Use System Settings is not checked. The amount of time (in
seconds) that a button must be pressed during a press-and-hold operation before the
Hold button action is performed.
l Time Out: Available when Use System Settings is not checked. The amount of time (in
hours, minutes, and seconds) that the system waits to determine if the Multi Tap button
action is performed.
Hold

To assign a media function to a press-and-hold button press, tap the Hold button and then
select a media function.

To set a custom hold time for the button, deselect the Use System Settings check box and then
enter the hold time (seconds) in the Hold Time text box.

NOTE: A custom hold time can be set for each button on the keypad.

224 • Crestron Home™ OS Product Manual — Doc. 8525Z