Page 226 - CRESTRON HOME OS-3

Time Out Action: A time out action can be performed when the time out period expires. To set
the time out action, tap the Time Out Action button and then assign an action.

NOTES:

l A time out period begins after the last button press and is used to determine how long
the Crestron Home system waits for an addition button press. The default timeout
period is 24 hours.

l To configure the time out period.for the keypad, tap the gear button next to the
Enable Time of Day button.
o To set a custom time out period, deselect the Use System Settings check box and
then enter the time out period in the Hours, Minutes, and Seconds text boxes.
o To use the system wide settings, select the Use System Settings check box.
o The maximum time out period is 24 hours. To set the time out period to 24 hours,
type 0 in the Hours, Minutes, and Seconds text boxes.

Mode: Button Emulation
Select Button Emulation from the Modedrop-down list to emulate a button on a Lutron keypad
when the button is pressed.

NOTE:

l To emulate multiple Lutron buttons, create a phantom button in the Lutron system that
performs all of the required functions. Assign the phantom button to the button.
l To emulate a Lutron button and a function within Crestron Home, create a sequence
that recalls the Lutron button and the Crestron Home function. For details, refer to
Mode: Sequence (on page 143).

226 • Crestron Home™ OS Product Manual — Doc. 8525Z