Page 228 - CRESTRON HOME OS-3

Mode: External Function
Select Media Functions from the Mode drop-down list to recall an external function when the
button is pressed. The external function can be recalled using the tap, double tap, press and
release, and multi-press functionality.

NOTES:
l Assign different actions to the Tap, Double, and P/R button functions to recall different
actions with the same button.
l The Tap, Double, and P/R button functions cannot be used with the Multi button
function. Settings for the Tap, Double, and P/R button functions will be lost when the
Multi button function is selected.

l Tap: One button press to recall the external function.
l Double: Two button presses to recall the external function.
l P/R: Press and hold the button to recall the external function. The external function is
stopped when the button is released.
l Multi: Multiple button presses can recall up to 10 external functions and provide the ability
to cycle through external functions.
Tap

To assign an external function to a single button press (single tap), tap the Tap button and then
select an external function.
Double

To assign an external function to a double button press (double tap), tap the Double button and
then select an external function.

Tap the gear button next to the location button to configure the double tap settings for the
keypad.

l Use System Settings: Tap the check box next to Use System Settings to use the delay that
is set by the system. For details, refer to Keypad Settings (on page 296).
l Wait For Double Tap: Available when Use System Settings is not checked. Tap the check
box next to Wait For Double Tap to enable the wait for double tap function. The Wait for
Double Tap function determines if the Crestron Home system triggers the Tap button
action or the Double Tap button action. The delay is the amount of time (in seconds) that
the system waits after a button press to determine if a subsequent button press is a
double tap. The values can be set between 0.2 and 1 second.

For example:

o Tap button action is set to route video to a bedroom.
o Double Tap button action is set to route audio to a bedroom.
When Wait for Double Tap is enabled:

228 • Crestron Home™ OS Product Manual — Doc. 8525Z