Page 833 - Med Plaza and Cancer Center

PROPRIETARY AND CONFIDENTIAL DRAFT 28/Feb/03

4.12 Local Alarm P.C. Board
Chapter 4: Removal, Replacement, and Adjustment Procedures

4.12 Local Alarm P.C. Board

Tools required: Phillips head screwdriver
5/16" nut driver

Removal

1. Using a phillips head screwdriver, loosen the screws (A) enough to allow
the front panel (B) to slide off (see figure 4-13 on page 4-34).

Figure 4-13. Local Alarm P.C. Board

2. Slide the front panel (B) up and off of the back box (G).

SHOCK HAZARD:
Turn off the power supply in the alarm, and leave it off during the
installation or replacement of any component or sub-assembly. Failure
to do so could result in personal injury or equipment damage.

3. Turn the power switch (H) to the OFF position.

4. Unplug the buzzer wiring (E).

Page 4 - 34 MedPlus TotalAlert™ Alarm Network Operation and Maintenance Manual (man291ra)