Page 363 - Womens Pavilion

COMPUTER INTERFACE MODULE
A m i c o M i c r o p r o c e s s o r B a s e d A l a r m
1. Pull the remote signal wires from the “Building management system” into the alarm panel. Make the connections
to the terminal blocks located on the side of the module. The wiring is fail-safe normally open, held closed, dry
FIELD ADJUSTMENTS
contacts to the monitoring equipment.

2. Make the appropriate wiring connections as per wiring diagram in Appendix N.

THE ANNUNCIATOR MODULE
A m i c o M i c r o p r o c e s s o
CLOSING THE FRAME/MODULE ASSEMBLY r B a s e d A l a r m
1. Swing up the frame assembly, ensuring that the stopper wires are folded into the back box.
FIELD ADJUSTMENTS
NOISE LEVEL CONTROL
2. Screw in the frame module to the top of the back box assembly by using the screws provided with the frame/module
assembly. The alarm is now ready for use!
Factory Default: 90 Decibles
THE ANNUNCIATOR MODULE LVL1
LVL2
Annunciator Module LVL3 J5
To decrease noise level:
1.
Locate jumper at J5. Move jumper to:
NOISE LEVEL CONTROL
LVL1 = 90 dBa.
NOISE LEVEL CONTROL
LVL2 = 80 dBa.
Factory Default: 90 Decibles SILENCE
Factory Default: 90 Decibels
LVL3 = 70 dBa.
LVL1
LVL2
To decrease noise level: LVL3 J5
To decrease noise level:
1. Locate jumper at J5. Move jumper to:
1. Locate jumper at J5. Move jumper to:
LVL1 = 90 dBa. LVL1 = 90 dBa.
CONTROL OF REMOTE ALARM BUZZER
LVL2 = 80 dBa. LVL2 = 80 dBa. SILENCE
LVL3 = 70 dBa.
LVL3 = 70 dBa.
Factory Default: Normal Condition

CONTROL OF REMOTE ALARM BUZZER
To silence remote alarm buzzer when silencing the
annunciator module:
CONTROL OF REMOTE ALARM BUZZER
Factory Default: Normal Condition
1.
Locate jumper at J6. Move jumper to:
To silence remote alarm buzzer, when silencing the
Factory Default: Normal Condition
NORM =
annunciator module:
Remote alarm buzzer will silence when annunciator J6
1. Locate jumper at J6. Move jumper to: ALRM
To silence remote alarm buzzer when silencing the
module is silenced.
annunciator module: NORM
NORM = TEST
Locate jumper at J6. Move jumper to:
1.
ALRM =
Remote alarm buzzer will silence when annunciator
module is silenced.
Remote alarm will not silence when annunciator
NORM =
module is silenced. The buzzer will only silence
ALRM = when alarm condition has been cleared. Please J6
Remote alarm buzzer will silence when annunciator
Remote alarm will not silence when annunciator ALRM
refer to Appendix B.
module is silenced.
module is silenced. The buzzer will only silence when NORM
alarm condition has been cleared. Please refer to TEST
Appendix B. ALRM =
Remote alarm will not silence when annunciator
14 Amico Pipeline
module is silenced. The buzzer will only silence
when alarm condition has been cleared. Please
Page: 16 refer to Appendix B.

Page: 16