Page 12 - HR500 User Guide - 2016-USA Version Hensler_Neat

F. Rotors

The function of the Rotor is to contain and spin-sweep the bone chips over the surface of the
blade. Revolving Rotor generates centrifugal forces that push the bone chips against the surface
of the blade allowing the cutting teeth of the blade cut portions of the bone chips. Each Rotor is

designed to function in conjunction with specific group of blades.

S16 Rotor

For S-Blades
Autoclave
- The S16 Rotor specifically designed to
match the size-and-cut S-blades that are
for milling cancellous or cortical-

cancellous (not pure cortical) bone.
- S16 Rotor is capable of accepting 3
bone chips as large as 16mm in

dimensions (12cc total) per loading.
S16 Rotor

M16 Rotor Autoclave

For the self-clearing M-Blades

The M16 Rotor specifically designed to
match the cut-and-trim blades that are for
milling cortical or cortical-cancellous
(not pure cancellous) bone.

- M16 Rotor is capable of accepting 3

bone chips as large as 16mm in
dimensions (12cc total) per loading. M16 Rotor

11