Page 35 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Electrical, Gauges & Ignition

Solder Slugs Battery Disconnect Switches
Use solder slugs to secure ring terminal ends to battery cable. Battery disconnect switches control electrical supply to the vehicle allowing
Individual pieces are the correct amount of solder to be used vehicle to be shut down in the event of an emergency or to secure vehicle
for each size of cable. Package of 10. ALL76131 when not in use. Disconnects are offered as a single-pole version and a
Part No. Description double-pole (two separate circuits for vehicles equipped with an alternator).
ALL76131 Slug For 2 Gauge Terminals
ALL76132 Slug For 4 Gauge Terminals
Standard-Duty Switch With Decal
Ring Terminals Standard-duty switch mounts in a 3/4" hole in a panel up to
Use to repair or build custom length battery cables, or when 1/4" thick and includes a decal to indicate On/Off position.
installing a battery disconnect switch. Terminals may be crimped or soldered Switch has 3/8"-24 terminals and is rated at 175-amp continu-
to wire. Sold in pairs with heat-shrink sleeving for a waterproof connection. ous duty. Double-pole switch also has 10-32 studs rated at
20-amp continuous duty.
Part No. Description Part No. Description
ALL76116 2 Gauge, 5/16" Hole ALL76118 4 Gauge, 5/16" Hole Part No. Description
ALL76117 2 Gauge, 3/8" Hole ALL76119 4 Gauge, 3/8" Hole ALL80156 Switch w/Decal (Single Pole)*
ALL80157 Switch w/Decal (Double Pole) † ALL80156
Impact Crimper
Standard Duty Switch With Panel
ALL76135
Excellent for permanently crimping std. cable ends to battery cables. Standard-duty switch is pre-mounted in a 2-3/4" x
3-1/4" aluminum panel with brightly screen printed
graphics to indicate the On/Off position. Switch has
Gold Battery Terminals
3/8"-24 terminals and is rated at 175-amp continuous
Terminals are machined from solid brass stock, duty. Double pole switch also has 10-32 studs rated at
24k gold-plated for maximum conductivity, and 20-amp continuous duty. ALL80158
feature 5/16" fasteners to secure battery cables with ring ALL76120 Part No. Description
terminal ends. Top post terminals have additional provisions for attaching ALL80158 Switch w/Panel (Single Pole)*
accessory or ground wires for a clean appearance. Sold in pairs. ALL80159 Switch w/Panel (Double Pole) †
Part No. Description
ALL76120 Top Post Severe-Duty Switch With Decal
ALL76122 Side Post
Heavy-duty switch mounts in a 3/4" hole
ALL76122 in a panel up to 1/4" thick and include a
Battery Terminal Covers decal to indicate On/Off position. Switch
ALL76150 ALL80155
has 1/2"-20 terminals, is rated at 300-amp continuous duty and
Covers slip over battery cables and cover battery is sealed to resist weather and help prevent internal corrosion. Double-pole
terminals to prevent accidental shorting. Fit most switch also has 10-32 studs rated at 20-amp continuous duty.
top post batteries. Required by many sanctioning racing bodies. Package of Part No. Description
2 includes one black and one red cover. ALL80154 Switch w/Decal (Single Pole)*
ALL80155 Switch w/Decal (Double Pole) †
Battery Cable Boots *Single-Pole Disconnect has two terminals and is recommended for vehicles not using an
alternator that needs ability to be shut down in the event of an emergency or when securing
ALL76154 a vehicle by shutting all power off to the vehicle. Note: When attempting to shut down a
Battery cable boots can be used for a variety of vehicle with an alternator using a single circuit battery disconnect, the alternator may con-
tinue supplying power to the vehicle ignition system, allowing vehicle to continue to run.
applications including covering battery terminals on smaller †Double-Pole Disconnect has four terminals with two separate circuits which is recommended
terminal batteries and starter solenoid connections. Boots have an opening for a vehicle with an alternator that needs to be shut down in the event of an emergency.
that will accept up to 2-gauge cable. Sold as a pair, one red and one black.
Battery Disconnect Panel NEW!
Battery Cable Thru Stud ALL80129
ALL76142 Aluminum panel is pre-drilled and labeled with on/off
Run battery cable through firewall or any body panel to easily identify the position of most standard battery
safely. 3/8"-16 thread. disconnects. Panel features four 3/16" mounting holes
and a 3/4" disconnect mounting hole.
Firewall Cable Bushing
Mounts securely to the firewall and locks onto the wire for a waterproof Battery Disconnect Boots
and vibration-proof seal. Protect terminals on battery disconnects from being shorted.
Part No. Description Part No. Description
ALL76137 2 Gauge ALL76152 Red, 2-Pack
ALL76138 4 Gauge ALL76153 Black, 2-Pack

34