Page 37 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Electrical, Gauges & Ignition

Chevy Mini-Starter Universal Heat Wrap
ALL80520 ALL34238
It’s smaller, lighter, and offers several mounting Heat-resistant material measures 7" x 22"
options. Perfect starter for race cars with making it ideal for wrapping starter motors or
clearance problems in the chassis or around other components that are close to high-heat areas. Wrap features a reflec-
header pipes. Chevy 153- and 168-tooth tive material on one side to protect against radiant heat and includes two
applications. Starter has 1.4kw permanent 24" long stainless steel tie-wraps for securing material.
magnet, weighs just 9.6 lbs. and includes bolts and shims.
Part No. Description Starter Solenoid And Installation Kit
Replacement Parts ALL76202
ALL80521 Starter Solenoid
ALL80522 Starter Drive Assembly Relocate starter solenoid away from direct engine heat to provide easy
ALL80523 Starter Pinion access and eliminate hot start problems common on General Motors
ALL80524 Bolts And Shims
vehicles. An under-hood starter switch
can also be added. Includes standard
Chevy Mini-Starter
duty, Ford-style solenoid, mounting
ALL80515
screws, terminals, and wiring kit.
3HP high-torque gear reduction, block-mount Part No. Description
Chevy mini starter. In-line mounting block will Related Parts
fit either 153- or 168-tooth flywheels and has ALL76201 Installation Kit Only
rotation holes for added clearance. Mounting bolts and ALL76203 Starter Solenoid Only
shim kit included.
Solenoid Jumper Wires
Jumper wire completes the circuit to the starter solenoid on the starter
GM LS Mini-Starter
when using remote mounted solenoids such as ALL76203.
ALL80516
NEW! Part No. Description
Block-mount GM LS gear ALL76208 Jumper Wire With Spade Terminal
reduction mini starter works with 168-tooth ALL76209 Jumper Wire With Ring Terminal
flywheels and provides increased starting per-
formance over OE-style starters. Starter features Remote Starter Switch Kit
a 3-position mounting block, allowing the starter motor ALL76205
to be rotated for additional clearance around exhaust and frame Kit includes a low-profile, steel-cased
obstructions. A high-torque 3HP motor combined with 3.75:1 gear reduction foot pedal with 8-foot cord and assorted
is ideal for engines with up to 11:1 compression ratio. wire ends to work with many applications.
Provide hands-free engine cranking when adjusting valves.
Engine

SB Chevy Rear Main Seal Adapters Drain Plug Kits NEW!
Billet aluminum adapter Drain plug kits include a machined weld-on bung that has a step added to fit
allows installation of a inside a drilled hole for easy installation. Kits are perfect when adding drain
two-piece style crank- plugs to oil pans, rear end housings, dry sump tanks, etc.
shaft seal and early Size Aluminum Bung Steel Bung
(pre-1986) crankshaft 3/8"NPT ALL50732 ALL50733
into a 1986 and newer ALL26125 ALL26126 ALL26127 1/2"NPT ALL50734 ALL50735
SB Chevy (pre-LS) engine. Adapters include mounting hardware. Alignment
tool ALL26127 (sold separately), is recommended to ensure proper installa- Magnetic Drain Plug
tion and centering of adapter plate. ALL87040
Replacement plug for standard 1/2"-20 drain holes has a magnetic end to
Part No. Description
ALL26125 Seal Adapter For Early (Pre-’86) Oil Pan capture small particles in oil that can help identify a problem early.
ALL26126 Seal Adapter For Late (’86-Up) Oil Pan
ALL26127 Alignment Tool
Plastigage Kit
®
Main Bearing Spacer Kit ALL96475
ALL26124 Plastigage strings are a simple and accurate way to verify crankshaft, main
Use main bearing spacers to install and rod bearing clearances. Kit includes two green .001" to .003" and
Chevy 350 crank in a 400 block. one red .002" to .006" (12" long strings) individually packaged inside
calibrated sleeves. Detailed instructions are included.

36