Page 39 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Engine

Oil Coolers - Flange Mount Engine Diaper
Adding an oil cooler to a vehicle increases ALL69011
engine life and reduces engine operating Engine diaper will help contain
temperature. Engine oil not only lubricates but also removes a large amount engine oil and fragments if an
of heat from the engine. Top engine builders recommend and often require engine failure occurs. Increase
use of an oil cooler. Coolers have a 1/2"NPT female bung commonly used safety and reduce the chance of
for connecting a temperature sending unit or similar accessories and have control loss due to debris on the racing
built-in flanges for mounting to the deck underside of most dirt late models, surface. Diaper wraps around oil pan and secures to header bolts. Diaper is
modifieds or other vehicles that would benefit from use of an oil cooler. NHRA approved but is not designed for vehicles that require SFI-approved
Part No. Description diapers. Diaper features a sewn-in, non-replaceable oil absorbent pad and is
ALL30146 Cooler With -10AN Fittings, 4" x 15" x 3-1/2" Tall For Most Wet Sump Systems 23" long x 12-1/2" high x 12" wide.
ALL30145 Cooler With -12AN Fittings, 8-3/4" x 15" x 3-1/2" Tall For Most Dry Sump Systems
Part No. Description
Replacement Parts
Linear Engine Oil Coolers ALL99043 Replacement Tabs, 4-Pack ALL99347
Finned aluminum coolers have 3/4"NPT ends ALL99347 Replacement Buckle, 1 Set ALL99043
and T-slots for easy mounting. ALL69013 Engine Diaper Pad, 22" x 30"
Part No. Description
ALL30142 3 Ft. SB Chevy Timing Cover
ALL30143 4 Ft. ALL90010
ALL30144 5 Ft.
Excellent replacement for distorted and leaky timing
SB Chevy Lifter Valley Vents covers. Cover fits most popular standard small block
ALL90065 Chevrolets.
Lifter valley vents positively vent the crankcase
and eliminate oil drain-through and windage SB Chevy Timing Cover (BB Chevy Seal)
losses. When used with valley screens, vents ALL90012
prevent damage from broken valvetrain components. Vents have 1/4"NPT Black anodized timing cover is designed for small block
threads and a 9/16" hex head to ease installation. Package of 8. Chevy fitted with an aftermarket crankshaft with a BB
Chevy snout.
Breather Tanks Part No. Description
Aluminum breather tanks are 11-1/2" x 3", include mount- Related Part
ing bracket, clamp-on breather element, drain, and one or ALL87282 BB Chevy Timing Cover Seal
two 3/8"NPT bung(s). ALL36109 can vent two systems.
Ideal for dry sumps and rear ends. Aluminum Timing Covers
Part No. Description Polished cast aluminum covers resist
ALL36108 Tank With One Bung the warping and leaking common
ALL36109 Tank With Two Bungs with OE-style stamped steel covers.
Replacement Parts
ALL36202 1-1/2" Washable Breather Recessed mounting holes are
ALL99030 1/4"NPT Petcock ALL36109 designed for button-head fasteners
ALL99031 3/8"NPT To 1/4"NPT Fitting (ALL99390) for proper installation.
Covers clear most double roller-style ALL90008
Breather Sock timing chains.
ALL36208
Part No. Description
The breather sock fits over standard 3" diameter, 2-1/2" tall ALL90008 SB Chevy
valve cover breathers to help catch residual oil discharge. A practical alterna- ALL90009 BB Chevy ALL90009
tive to wrapping dirty shop rags around valve cover breathers! Socks are Related Part Timing Cover Fasteners
ALL99390
easily cleaned with a mild detergent.
Timing Cover Seals
Mini Breather Tanks
Seal works with stamped steel or aluminum covers.
Small-capacity spun aluminum tank will vent dry sump tank, Part No. Description ALL87280
transmission, or rear end. Tank has a 1/4"NPT bung on bot- ALL87280 SB Chevy
tom and a clamp-style bracket for mounting to chassis tubing. ALL87282 BB Chevy
Part No. Description
ALL36140 Clamps To 1-1/2" Dia. Tubing
ALL36141 Clamps To 1-3/4" Dia. Tubing
ALL36103 Replacement Breather Element
ALL36140
38