Page 36 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

ELECTRICAL, GAUGES & IGNITION

Solder Slugs Firewall Cable Bushing
Use solder slugs to secure ring terminal ends to bat- Mounts securely to the firewall and locks onto
tery cable. Individual pieces are the correct amount of the wire for a waterproof and vibration proof seal.
solder to be used for each size of cable. Package of 10. Part No. Description
Part No. Description ALL76131 ALL76137 2 Gauge
ALL76131 Slug For 2 Gauge Terminals ALL76138 4 Gauge
ALL76132 Slug For 4 Gauge Terminals
Battery Disconnect Switches
Ring Terminals Battery disconnect switches control electrical supply to the
Use to repair or build custom length vehicle allowing vehicle to be shut down in the event of an
battery cables, or when installing a battery emergency or to secure vehicle when not in use. Disconnects
disconnect switch. Terminals may be crimped are offered as a single pole version and a double pole with two
or soldered to wire. Sold in pairs with heat shrink separate circuits for vehicles equipped with an alternator.
sleeving for a waterproof connection.
Part No. Description Standard Duty Switch With Decal
ALL76116 2 Gauge, 5/16" Hole Standard duty switch mounts in a 3/4" hole in a panel
ALL76117 2 Gauge, 3/8" Hole up to 1/4" thick and includes a decal to indicate On/Off
ALL76118 4 Gauge, 5/16" Hole position. Switch has 3/8"-24 terminals and is rated at
ALL76119 4 Gauge, 3/8" Hole 175 amp continuous duty. Double pole switch also
has 10-32 studs rated at 20 amp continuous duty.
Impact Crimper ALL76135 Part No. Description
Excellent for permanently crimping standard ALL80156 Switch w/Decal (Single Pole)*
cable ends to battery cables. ALL80157 Switch w/Decal (Double Pole) †
ALL80156
Gold Battery Terminals Standard Duty Switch With Panel
Terminals are machined from solid brass Standard duty switch is pre-mounted in a
stock, 24k gold plated for maximum 2-3/4" x 3-1/4" aluminum panel with brightly
conductivity and feature 5/16" fasten- screen printed graphics to indicate the On/Off
ers to secure battery cables with ring position. Switch has 3/8"-24 terminals and is
terminal ends. Top post terminals have rated at 175 amp continuous duty. Double pole
additional provisions for attaching accessory or ALL76120 switch also has 10-32 studs rated at 20 amp
ground wires for a clean appearance. Sold in continuous duty.
pairs. Part No. Description
ALL80158 Switch w/Panel (Single Pole)* ALL80158
Part No. Description
ALL76120 Top Post ALL80159 Switch w/Panel (Double Pole) †
ALL76122 Side Post ALL76122
Severe Duty Switch With Decal
Heavy duty switch mounts in a 3/4" hole in a ALL80155
Battery Terminal Covers ALL76150 panel up to 1/4" thick and include a decal
Covers slip over battery cables and to indicate On/Off position. Switch has
cover battery terminals to prevent ac- 1/2"-20 terminals, is rated at 300
cidental shorting. Fit most top post mount amp continuous duty and is sealed
batteries. Required by many sanctioning to resist weather and help prevent
racing bodies. Package of 2 includes one internal corrosion. Double pole
black and one red cover. switch also has 10-32 studs rated at 20 amp continuous duty.
Part No. Description
Battery Cable Boots ALL76154 ALL80154 Switch w/Decal (Single Pole)* †
Battery cable boots can be used for a ALL80155 Switch w/Decal (Double Pole)
variety of applications including cover- * Single Pole Disconnect has two terminals and is recommended for
ing battery terminals on smaller terminal vehicles not using an alternator that needs ability to be shut down in the
batteries and starter solenoid connec- event of an emergency or when securing a vehicle by shutting all power
off to the vehicle. Note: When attempting to shut down a vehicle with an
tions. Boots have an opening that will alternator using a single circuit battery disconnect, the alternator may
accept up to 2 gauge cable. Sold as a pair, one red and one black. continue supplying power to the vehicle ignition system allowing vehicle
to continue to run.
Battery Cable Thru Stud † Double Pole Disconnect has four terminals with two separate circuits
which is recommended for a vehicle with an alternator that needs to be
ALL76142 shut down in the event of an emergency.
Run battery cable through firewall or any
body panel safely. 3/8"-16 thread. Battery Disconnect Boots
Protect the terminals on battery disconnects
from being accidentally shorted.
Part No. Description
ALL76152 Red, 2-Pack
ALL76153 Black, 2-Pack

34