Page 40 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

ENGINE

Oil Coolers - Flange Mount Engine Diaper
Adding an oil cooler to a vehicle ALL69011
increases engine life and reduces Engine diaper will help
engine operating temperature. Engine oil contain engine oil and frag-
not only lubricates but also removes a large ments if an engine failure
amount of heat from the engine. Top engine builders recommend occurs. Increase safety and
and often require use of an oil cooler. Coolers have a 1/2"NPT fe- reduce the chance of control
male bung commonly used for connecting a temperature sending loss due to debris on the racing
unit or similar accessories and have built in flanges for mounting surface. Diaper wraps around oil
to the deck underside of most dirt late models, modifieds or other pan and secures to header bolts. Diaper is NHRA
vehicles that would benefit from use of an oil cooler. approved but is not designed for vehicles that
Part No. Description require SFI approved diapers. Diaper features a
ALL30146 Cooler With -10AN Fittings, 4" x 15" x 3-1/2" Tall For Most Wet Sump sewn-in, non-replaceable oil absorbent pad and is
Systems 23" long x 12-1/2" high x 12" wide. ALL99043
ALL30145 Cooler With -12AN Fittings, 8-3/4" x 15" x 3-1/2" Tall For Most Dry Replacement Parts
Sump Systems
Part No. Description
Linear ALL99043 Replacement Tabs, 4-Pack ALL99347
Replacement Buckle, 1 Set
Engine Oil Coolers ALL99347 Engine Diaper Pad, 22" x 30"
ALL69013
Finned aluminum coolers
have 3/4"NPT ends and
T-slots for easy mounting. SB Chevy Timing Cover
Part No. Description ALL90010
ALL30142 3 Ft.
ALL30143 4 Ft. Excellent replacement for distorted and
ALL30144 5 Ft. leaky timing covers. Cover fits most popular
standard small block Chevrolets.
SB Chevy
Lifter Valley Vents ALL90065 SB Chevy Timing Cover
Lifter valley vents positively (BB Chevy Seal) ALL90012
vent the crankcase and eliminate Black anodized timing cover is designed for
oil drain-through and windage small block Chevy fitted with an aftermarket
losses. When used with valley crankshaft with a BB Chevy snout.
screens, vents prevent damage Related Part
from broken valvetrain com- Part No. Description
ponents. Vents have 1/4"NPT ALL87282 BB Chevy Timing Cover Seal
threads and a 9/16" hex head to ease installation. Package of 8.

Breather Tanks Aluminum
Aluminum breather tanks are 11-1/2" x 3", Timing Covers
include mounting bracket, clamp on breather Polished cast aluminum
element, drain, and one or two 3/8"NPT bung(s). covers resist warping and
ALL36109 can vent two systems. Ideal for dry leaking that is common with
sumps and rear ends. OE style stamped steel covers.
Recessed mounting holes are
Part No. Description
ALL36108 Tank With One Bung designed for button head fas-
ALL36109 Tank With Two Bungs teners (ALL99390) for proper
installation. Covers clear most ALL90008
Replacement Parts double roller style timing chains.
Part No. Description Part No. Description
ALL36202 1-1/2" Washable Breather ALL90008 SB Chevy
ALL36208 Breather Sock, 3” Dia., Helps Catch ALL90009 BB Chevy
Residual Oil From Breathers NEW! ALL36109 ALL90009
ALL99030 1/4"NPT Petcock Related Part
ALL99031 3/8"NPT To 1/4"NPT Fitting Part No. Description
ALL99390 Timing Cover Fasteners
Mini Breather Tanks
Small capacity, spun aluminum tank will vent dry Timing Cover Seals
sump tank, transmission or rear end. Tank has a Seal works with stamped steel or aluminum
1/4"NPT bung on bottom and a clamp style bracket covers.
for mounting to chassis tubing.
Part No. Description
Part No. Description ALL87280 SB Chevy
ALL36140 Clamps To 1-1/2" Dia. Tubing ALL87282 BB Chevy ALL87280
ALL36141 Clamps To 1-3/4" Dia. Tubing
ALL36103 Replacement Breather Element ALL36140

38