Page 533 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

Mustang Suspension Components Mustang Suspension Components (Cont.)
Struts Rear Trailing Arms And Panhard Bar
Aluminum-bodied, mono-tube struts are three pounds Rear trailing arms are manufac-
lighter and compatible with stock or aftermarket K- tured from .120" wall steel tubing
members. Externally adjustable valves are accessible from for maximum strength and fitted
under the hood. Sold individually. with greasable, graphite/polyure- QA15266
Part No. Description thane bushings for strength and
QA1HS601S 1979-93 Mustang 5.0L maximum traction. Adjustable trailing arms allow setting desired
QA1HS603S 1994-04 Mustang, 2" Lowered, 5.0L pinion angle for maximum traction.
QA1HS603S 1994-04 Mustang, 4.6/5.4L
QA1HS605S* 2005-Up Mustang, With Sway Bar Bracket Part No. Description
* Requires QA1CC105MU camber plate. Lower Trailing Arms
QA15221 1979-04 Mustang; 1979-86 Capri; 1980-88 T-Bird/Cougar, Box Style
QA15276 2005-11 Mustang, Tubular
Caster And Camber Plates Upper Trailing Arms
Plates use PTFE-lined, replaceable bear- QA15255 1979-04 Mustang; 1979-86 Capri, Adjustable
ings in housings that are tig-welded for QA15266* 2005-10 Mustang, Tubular
maximum strength and durability. Change camber Panhard Bar
and caster for street use as well as drag or road racing.
QA15220 2005-10 Mustang, Adjustable
Part No. Description
QA1CC100MU 1979-89 Mustang * Will not fit 2011 model.
QA1CC102MU 1990-93 Mustang
QA1CC104MU 1994-04 Mustang Dodge/Plymouth Suspension Components
Tubular Control Arms
Bump Steer Kit Stronger, yet lighter than
Correct bump steer caused by changes production units, tubular steel
in toe-in during suspension travel. "X" control arms are engineered as
series rod ends with jam nuts, anodized a direct bolt-on. Control arms are
aluminum adjusting sleeves with jam fitted with bushed steel ends and may be used
nuts, special spindle studs with washer and lock nut, and bump with factory suspension or aftermarket coil-over
steer spacer assortment are included in kit. conversion kits.
Part No. Description Part No. Description
QA1BAX102 1979-93 Mustang 5.0L Inc. Cobra
QA1BAX104 1994-04 Mustang 4.6/5.0L Inc. Cobra QA152301 Upper Control Arms For “A” Body
QA152303 Upper Control Arms For Early “A” Body
Street And Race Control Arms QA152305 Upper Control Arms For “B” Or “E” Body
Lightweight, tubular steel control QA152307 Lower Control Arms For “A” Body
arms help reduce critical front QA152308 Lower Control Arms For “B” Or “E” Body
end weight and improve handling. QA1MU1ESA
Street control arms are fitted with Dynamic Strut Bars
polyurethane bushings, OEM-type Rigid, 6061-T6 billet aluminum
ball joints and offset cross shafts for eased camber settings. strut bars are fully adjustable and are
Engineered exclusively for drag racing, Race arms use precision sold complete with rod ends. A direct bolt-on,
chromoly rod ends and low friction ball joints for smooth, quick strut bars may be used with an aftermarket or fac-
suspension response. Sold per pair with necessary hardware. tory “K”-member.
Part No. Description Part No. Description
Street Control Arms QA152311 Dynamic Strut Bars For 1963-76 “A” Body
QA1MU1ESA 1979-93 Mustang, 4.6/5.0L
QA1MU2ESA 1994-04 Mustang, 4.6/5.0L QA152312 Dynamic Strut Bars For 1962-72 “B” Or “E” Body
Race Control Arms
QA1MU1RCA 1979-93 Mustang, 4.6/5.0L Tubular “K” Members
QA1MU2RCA 1994-04 Mustang, 4.6/5.0L
Direct bolt-on, tubular
Tubular K-Members design “K”-members are
engineered to be both
Up to 50% lighter than the durable and lightweight.
stock K-member, Tubular “K”-members provide
steel K-members help im- increased header clearance,
prove geometry and minimize while reducing front end weight up to 50 lbs. Includes
bump steer, while providing attachment points to accept OEM and aftermarket engine mounts.
increased header and oil pan
Description
Part No.
clearance. Fully compatible with OEM components without any QA152313 “K”-Member For 1967-72 “A” Body
wheel or tire fitment issues. Modular design uses bolt-in engine QA152314 “K”-Member For 1971-72 “B” Body And 1970-74 “E” Body
mounts to allow for future engine changes. QA152315 “K”-Member For 1966-70 “B” Body
Part No. Description
QA1MUK11 1979-93 Mustang, 5.0L
QA1MUK12 1994-04 Mustang, 4.6L

531