Page 276 - 2018 Racecar Engineering Open Wheel Parts and Accessories Catalog

Billet Aluminum Remote Oil Filter Mounts Self Contained Oil Preheater
Remote oil filter mount accepts Chevy style oil filter and offers MOR23991
more installation options. Black anodized, billet aluminum mount has Pre-heat 12 quarts of oil in just 25 minutes using 400
two -12AN inlets and three outlets, one -12AN and two 1/4" NPT.
watts of power. Self contained, plug-in 110/120 unit is 4-3/4" from
fitting to tip. Includes 1/2"-14 NPT aluminum weld bung.

External Heating Pads
MOR23763 MOR23764 Pads adhere to oil tanks to pre heat
Part No. Description engine oil. Etched foil dis trib utes heat
MOR23763 Remote Oil Filter Mount, Side Port Style evenly and silicone outer shell re sists
MOR23764 Remote Oil Filter Mount, Front Port Style oil and dirt. Includes 18 AWG elec tri cal
cord with plug for 110 volt AC outlets.
Oil Filter Bypass MOR23770 Part No. Description
Oil Filter Bypass fits all small block Chevy MOR23995 6" x 12" 360 Watt Pad, Hook And Spring Attachment
V8s. For use with wet sump oil MOR23996 5" x 7" 400 Watt Self Adhesive Pad,
systems when re mote oil filters or Heats From 66 to 160°F In 25 Min.
coolers are used. Bypasses are cast MOR23997 2" x 15" Self Adhesive Pad, Perfect For Narrow Areas
from aluminum with 1/2" NPT inlet and outlet.
Includes gaskets and fasteners. Small Block Chevy
Die Cast Aluminum Valve Covers MOR68385
Billet Oil Filter Bypass Plate Tall, thin wall small block Chevy 262-
400 covers are about half the weight of
MOR23782 standard cast ver-
Plate is necessary when using a remote sions. The casting
oil filter or returning oil from dry sump systems. process yields a
Plate fits small block Chevy and accepts -10AN O-ring port fittings. blemish free sur-
O-rings are captured in the plate for a tight seal against the block. face with no poros-
Includes mounting hard ware and O-rings. ity. Valve covers are
hand polished and sold
in pairs with studs, grom-
Oil Filter Block-Off Plate mets and crossover breather
MOR23840 tube kits.
Often used on dry sump oil system in-
stallations, Plate has a 1/2" NPT port for input pressure line and fits Sprint Car Billet Aluminum Valve Covers
all small and big block Chevy (except Gen. V/VI or those with bolt
hole at center of pad). MOR68050
Each valve cover is CNC-
machined from billet aluminum.
In-Line Oil Filter Each cover weighs less than
Fil ters are a necessity in many scavenge line locations to pre vent 1.69 pounds without sacrific-
metal chips from entering dry sump pumps, rear end pumps, and ing strength. Fit SB Chevy 13 to
other oiling system com po nents. Light weight anodized alu mi num 23 degree cylinder heads with conventional valve location. A fitted
filters are easy to disassemble and clean. silicone rubber bead flange seal provides an air tight vacuum seal
promoting improved ring seal and power. Black anodized finish. Sold
Part No. Description
MOR23850 5/8"-10 Fittings in pairs.
MOR23860 3/4"-12 Fittings
MOR23870 1/2"-8 Fittings
Breather Tube Kits
Filter Fit ting MOR23961 Engineered for small block Chevy powered race
cars, kit includes components to build an effective
-12AN fittings trap met al chips in the oil before they reach the
crankcase breather system. Mounting hardware
pump, engine, or rear end. Fits dry sump tanks, oil pans, rear end
filler/breath ers, etc., and is eas i ly re moved for cleaning. Screen is and aluminum weld-in bungs included. MOR68850
304 stainless steel, 16 mesh wire, .015" diameter. Sold individually. Part No. Description
MOR68762 Crossover Breather Tube Kit
Oil Preheaters MOR68850 1.75" Dia. Tubing With 8.5" Long Legs, Black Anodized Finish
Oil Preheaters heat the oil, without
scorching or boiling. 212 watts of pow er Weld-In Filtered Breather Kit
raises tem per a ture of 12 quarts of oil 60°F MOR68800
in approximately 30 minutes. Element is Designed for use with aluminum
4-1/2" long and screws into place with 1" NPT fitting. valve covers, kit includes two
120 volt rated unit includes detachable 7' cord.
internally baffled breather tubes
Part No. Description which must be welded to valve
MOR23980 Oil Preheater With Aluminum Fitting covers.
MOR23990 Oil Preheater With Steel Fitting
275