Page 192 - 2019 Allstar Performance Parts and Equipment Catalog

SUSPENSION 2.5" Coil-Over Kits ALL64141

Kits include everything to assemble one complete shock.
Slotted tops allow quick and easy spring changes. Kits are
for 2-1/2" coil-over springs and are designed for use with 2"
steel bodied shocks unless specified.
Kit
Top
Shock Number Replacement Replacement Replacement Replacement
Adjuster Nut
7" Sleeve
5" Sleeve
AFCO
Kit With 7" Sleeve ALL64141 ALL64170 ALL64160 ALL64161 ALL64180
Bilstein
Kit With 7" Sleeve ALL64143 ALL64171 ALL64162 ALL64163 ALL64180
Fox
Kit With 7" Sleeve ALL64130 ALL64177 – ALL64164 ALL64180
Kit For Track Evolution Series With 7" Sleeve ALL64131 ALL64177 – ALL64165 ALL64180
Kit For Aluminum Threaded Body ALL64132 ALL64177 – – –
Integra
(Avenger) Kit With 7" Sleeve ALL64158 – – – ALL64180
Kit For Aluminum Threaded Body ALL64157 – – – –
JRI
Kit With 7" Sleeve ALL64136 ALL64178 – ALL64169 ALL64180
Koni
Kit With 5" Sleeve ALL64146 ALL64173 ALL64162 ALL64163 ALL64180
Kit With 7" Sleeve ALL64147 ALL64173 ALL64162 ALL64163 ALL64180
Penske
Kit With 7" Sleeve ALL64149 ALL64174 ALL64162 ALL64163 ALL64180
Pro
Kit With 7" Sleeve ALL64151 ALL64175 – ALL64165 ALL64180
QA1
(50 Series) Kit With 7" Sleeve ALL64145 ALL64172 – ALL64165 ALL64180
Kit For Aluminum Smooth Body w/7" Sleeve ALL64154 ALL64172 – ALL64167 ALL64180
Related Products
ALL64182 ..... 2-1/5" C/O Diaper Pin
ALL64183 ..... Snap Ring Flat (Koni)
ALL64184 ..... Snap Ring Round
ALL64186 ..... Snap Ring (Fox) ALL64182 ALL64183 ALL64184 ALL64186
5" Coil-Over Adapter Spring Pre-Loader
ALL64185 Pre-loader allows use of a softer spring rate
Aluminum adapter con- that is “pre-loaded” at ride height. The pre-
verts existing coil-over loaded spring will have less rate increase as the
kit from a 2-1/2" spring suspension travels. For example, a 150 lb./in.
to a 5" spring. Adapter inner spring can be pre-loaded to 400 lbs. at ride
hole I.D. is 2-1/2" to work with most height, but still only increases at a rate of
coil-over sleeves. Sold each, two are 150 lb./in. as suspension travels. The entire
typically required. unit may also be exchanged with
another unit with a different rate
spring pre-installed to allow spring
Spring Spacers
rate changes without affecting ride
height. Commonly used on the rear coil-overs, pre-loader
requires 3" I.D. spring, includes a thrust bearing set and
fits most shocks. Note: Unit is typically installed with
slotted inner half towards the shock body. Always check
components for possible interference.
Spring spacers can be used with 2-1/2" coil-over springs
or with coil-over kits and 5" adapter when extra spacing ALL64230 ..... Pre-Loader For 10" Tall Spring
is needed. ALL64232 ..... Pre-Loader For 12" Tall Spring
ALL64234 ..... Pre-Loader For 14" Tall Spring
ALL64195 ..... 1" Spacer ALL64212 ..... Replacement 3" Bearing Set
ALL64196 ..... 2" Spacer ALL11187
ALL64197 ..... 3" Spacer Related Parts
ALL11187 ...... Pre-Loader Body Wrench
ALL11188 ...... Pre-Loader Nut Wrench ALL11188

190 www.allstarperformance.com