Page 187 - 2019 Allstar Performance Parts and Equipment Catalog

Lower Control Arm Coarse Thread Weight Jack Bolts
Limit Clamps Weight jack bolts have 1"-8 threads for quick adjustment. SUSPENSION
Clamps fasten around tubular NEW! Use with ALL56113, ALL56114 and ALL56115 style
lower control arms providing spring plates.
a lower mounting point for a suspension ALL56106 ..... 8" Steel ALL56106
limit chain. Clamps are double shear style and ALL56107 ..... 11" Steel
accept 5/16" hardware. ALL56108 ..... 8" Aluminum
ALL68340 ..... 1"
ALL68341 ..... 1-1/8" Weight Jack Bolts With Internal Thread
ALL68342 ..... 1-1/4" Bolts have a 7/16"-20 internal thread on one end for
use with bolt-on and swiveler spring cups.
Lower Control Arm Kits Coarse thread bolts have 1"-8 outer
Universal kits are 2" threads while fine thread bolts ALL56095
longer than standard are 1-1/8"-12.
arms and must be cut Coarse Thread 1"-8 With 3/4" Hex
to length before welding slug into place. ALL56185 ALL56094 ..... 4" Steel
Ball joint sold separately. ALL56095 ..... 6" Steel
ALL56066 ..... 8" Steel
ALL56185 ..... RH Kit, Use With Press-In Ball Joint (ALL56206)
ALL56186 ..... LH Kit, Use With Screw-In Ball Joint (ALL56216) ALL56067 ..... 11" Steel
ALL56187 ..... RH Kit, Use With Screw-In Ball Joint (ALL56216) Fine Thread 1-1/8"-12 With 1/2" Square Drive
ALL56090 ..... 6" Aluminum
Lower Control Arms ALL56091 ..... 8" Aluminum
ALL56092 ..... 6" Steel
ALL56093 ..... 8" Steel
ALL56180
ALL56182
Jam Nuts
For Jack Bolts
ALL56181 Steel jam nuts for jack bolts ALL56068 ALL56110 ALL99052
ALL56068 ..... 1"-8 (Coarse) 1-1/8" Wrench
Lower control arms fit most asphalt racing chassis. ALL56110 ..... 1"-8 (Coarse) 1-1/2" Wrench
Includes ball joint and rod end. ALL99052 ..... 1-1/8"-12 (Fine) 1-3/8" Wrench
ALL56180 ..... LH Adjustable, 15-1/2" To 16"
ALL56181 ..... RH Adjustable, 17-3/4" To 18-1/2" Weight Jack Bolt Collars
ALL56182 ..... RH Adjustable, 17-3/4" To 18-1/2" (With Rod End Steel collar typically welds onto frame or
Sway Bar Mount) chassis for installation of a threaded jack bolt.
Collar includes grease fitting.
Cross Member Bushings ALL56099 ..... 1"-8
ALL56188 ALL56098 ..... 1-1/8"-12
Bushings mount on the inside
end of a strut-style lower Weight Jack Bolt Sleeves
control arm to act as a spacer Weld-in mild steel sleeve provides a mounting
between each side of the 3/4" inner rod point for jack bolts or adjustable shock mounts.
end and the crossmember. Package of 2. Sleeves are 2" long and have a 1-3/8" O.D. for
welding onto chassis tubing. ALL56073
Double Adjusters ALL56109 ..... 1"-8, Coarse Thread
Steel double adjusters increase adjustment ALL56073 ..... 1-1/8"-12, Fine Thread
capability of control arms, trailing arms,
Panhard bars, tie rod ends and other Weight Jack Plate ALL56112
items using threaded tube. Adjuster Heavy-duty steel plate has a threaded boss
includes one LH and one RH jam nut. welded to the center to accept jack bolts with
ALL56196 ..... 5/8"-18 RH Male/LH Male, 4-1/4" Long 1"-8 coarse threads. O.D. is 5".
ALL56197 ..... 3/4"-16 RH Male/LH Male, 5" Long
ALL56198 ..... 5/8"-18 RH Male/LH Female, 4" Long Coarse Thread Nut With Sleeve
ALL56199 ..... 5/8"-18 LH Male/RH Female, 4" Long
ALL56111
Short GN Strut Bar ALL56190 Steel coarse thread nut with sleeve has 1"-8
coarse threads.
Fits lower strut arm on strut bar
chassis. Bar has 3/4"-16 LH threads
(3" long). Hole spacing is 2-1/2".
www.allstarperformance.com 185