Page 184 - 2019 Allstar Performance Parts and Equipment Catalog

SUSPENSION Ball Joint Holders Slotted Upper Control Arm

Bracket Kit ALL60077
Kits contain (2) slotted brackets, (2) centered
bushings, (2) reducer spacers for 5/8" rod end

minum bushings (sold separately) allow for
plenty of adjustment options.
ALL56297
ALL56294 ALL56295 ALL56290 ALL56292 ALL56296 and a 1/2" bolt and nyloc nut. Offset alu-
Components
Holders are ideal for those who fabricate their own ALL60078 ............ Slotted Upper Brackets (Pair)
control arms. The holders have a 5/8" male RH thread ALL60080 ........... Centered Bushings (Pair)
and a 3/8" hole, commonly used with a clevis. Holders ALL60081 ............ 1/8" Offset Bushings (Pair)
accept ALL56214 or Moog K772 style screw-in ball joints, ALL60082 ............ 1/4" Offset Bushings (Pair)
sold separately. ALL60083 ............ 3/8" Offset Bushings (Pair)
ALL56290 ..... LH Angled Stud, Angled Tab, Standard Spread ALL60084 ........... 1/2" Offset Bushings (Pair)
ALL56292 ..... RH Angled Stud, Straight Tab, Standard Spread ALL18612 ............. Reducer Spacers For 5/8" Rod End
ALL56294 ..... LH Angled Stud, Angled Tab, Wide Spread ALL16490-1 ......... Hex Head Bolt 1/2"-20 x 3", Grade 5
ALL56295 ..... RH Angled Stud, Straight Tab, Wide Spread ALL16074-10 ....... Thin Nyloc Insert Nuts 1/2"-20, Package Of 10
ALL56296 ..... Universal Straight Stud, Straight Tab, Wide Spread
ALL56297 ..... Universal Design (ALL56296) Angled At 15 Degrees
ALL56194 ..... 5/8" RH Steel Clevis (Commonly Needed) Upper Control Arm Brackets
ALL56214 ..... Screw-In Ball Joint (Most Common)
ALL60025
Unwelded Stamped 3/16" mild steel brackets weld to
chassis as a mounting point for upper
Ball Joint Holder Kit ALL56298
control arm. Brackets have two 5/8"
Kit allows components to holes, spaced 7/8" apart for adjustment.
be welded at any angle. May be trimmed to desired height. Package of 2.
Stud is 5/8"-18RH thread,
bracket has a 3/8" hole.
Holder accepts ALL56214 or
Moog K772 style screw-in upper ball joint. Set-Up Plates
Set-up plates are used for
Female Double Adjusters squaring and stringing chassis ALL10660
Steel double adjusters increase adjustment to ensure accurate chassis
capability of control arms, trailing arms, set-up by eliminating wheel
Panhard bars, tie rod ends and other and tire differences. Plates are
items using threaded tube. Adjuster 1/2" thick and can also be used
includes two jam nuts. when setting bump steer or ALL10662
ALL56198 ..... 5/8"-18 RH Male/LH Female, 4" Long checking axle tubes for
straightness. Sold each.
ALL56199 ..... 5/8"-18 LH Male/RH Female, 4" Long
ALL10660 ..... 5x5, 7" x 28"
Steel and Aluminum Clevises ALL10662 ..... Wide 5, 12" x 28"
.230"
.230"
1.000"
Storage Tote
ALL059
Durable storage tote has many
4.000" uses around the shop or in
3.460"
the trailer. Store extra parts or
2.000"
keep parts from being damaged
during storage. Great for orga-
ALL56192, ALL56193 ALL56194 nizing ratcheting tie downs, specialty
3/4" clevises attach strut rod to A-frame (3/4"-16 thread tools, such as tire groover, siper and related
with a 1/2" hole). 5/8" clevises, commonly used with tools. Totes also work well for storing chemicals and fluids
Lefthander style upper A-arms, connect to ball joint to prevent spilling in cabinets. Interlocking lid design allows
holder (5/8"-18 thread with a 3/8" hole). multiple totes to be securely stacked together. Inside dimen-
sions are 20" L x 14" W x 12" H.
ALL56192 ..... 3/4" RH Steel
ALL56193 ..... 3/4" RH Aluminum
ALL56194 ..... 5/8" RH Steel

182 www.allstarperformance.com