Page 183 - 2019 Allstar Performance Parts and Equipment Catalog

Upper Control Arms Upper Control Arm
Powder coated, bushing style A-arms are Mounting Bracket SUSPENSION
available with steel or aluminum cross ALL60190
shaft and a straight or 10-degree ball Bracket is flame cut from 1/2" thick
joint position. Shaft bolt holes are 1/2" steel, with 6" bolt spacing. Welds to
diameter, spaced 6" on center. Tig frame and accepts upper A-arm.
welded .095" D.O.M. tube construc- ALL57906
tion. Bolt-in style arms accept ALL56204 or Moog
K6024 ball joints. Screw-in style arms accept ALL56214 or
Moog K772 ball joints. Upper Control Arm Shims
Individual steel shims fit between the upper
Bolt-In Bolt-In Screw-In 10° Screw-In 10°
Size Alum. Shaft Steel Shaft Alum. Shaft Steel Shaft control arm and chassis mount to adjust
7" – – ALL57940 – caster and camber. Shims have 9/16" wide ALL60201
7-1/4" – – ALL57941 – slots and easy-to-grasp tabs for installation and
7-1/2" ALL57902 ALL57922 ALL57942 ALL57962 removal. Package of 10.
7-3/4" ALL57903 – ALL57943 –
8" ALL57904 ALL57924 ALL57944 ALL57964 ALL60200 ..... 1/16" (0.062")
8-1/4" ALL57905 – ALL57945 – ALL60201 ..... 1/8" (0.125")
8-1/2" ALL57906 ALL57926 ALL57946 ALL57966
8-3/4" ALL57907 – ALL57947 –
9" ALL57908 ALL57928 ALL57948 ALL57968
9-1/4" ALL57909 – ALL57949 – 1-Piece Upper
9-1/2" ALL57910 ALL57930 ALL57950 ALL57970 Control Arm ALL60205
9-3/4" ALL57911 – ALL57951 –
10" ALL57912 ALL57932 ALL57952 ALL57972 Shims
10-1/4" ALL57913 – ALL57953 – Dual mount shims fit between the upper control arm and
10-1/2" ALL57914 ALL57934 ALL57954 ALL57974 chassis mount to adjust camber. One-piece design works
11" ALL57916 ALL57936 ALL57956 ALL57976
with most mounts/control arms with 6" bolt spacing using
1/2" mounting hardware. Sold each.
ALL60203 ..... 1/8" (0.125")
Metric ALL60204 ..... 3/16" (0.185")
Upper Control Arms ALL60205 ..... 1/4" (0.250")
Upper control arms fit stock, 6-7/8" ALL60206 ..... 3/8" (0.375")
mounts, found on Mid-size GM ALL60207 ..... 1/2" (0.500")
metric frames. Use with bolt-in style ALL60208 ..... 3/4" (0.750")
ball joint, Allstar 56220 or Moog ALL60209 ..... 1" (1.00")
K5208. Steel control arms have a ALL57990 ALL60210 ..... 7-Piece Kit, Includes ALL60203-60209
(one of each size)
steel cross shaft with holes spaced 6-7/8" on center.
ALL57990 ..... RH, 8"
ALL57992 ..... LH, 8-1/2" Caster Plate ALL10752
ALL57994 ..... LH, 9"
ALL57995 ..... LH, 9-1/2" Not sure if you turned your wheels
ALL57996 ..... LH, 10" the same amount each time when
adjusting caster settings on your race car?
Unless you have expensive turn plates, you’re
never certain, until now. This quick refer-
IMCA Legal ence gauge positions under the upper ball
Upper Control Arms joint nut, with markings facing up, for easy viewing. Place
IMCA legal upper control arms fit a mark on the shock body or fabricate an indicator to use
stock 6-7/8" mounts, found on as a reference point.
mid-size GM Metric frames. Use with
bolt-in style ball joint, Allstar 56220
or Moog K5208. Steel control arms ALL57831 Mono Ball Bearings
are available with steel or aluminum cross shaft and come Mono balls are commonly used in fabrication
complete with “IMCA certified” sticker.
of products including J-bars, control arms and
ALL57830 ..... RH, 8" With Steel Cross Shaft trailing arms. Bearings have an external grease
ALL57831 ..... LH, 8-1/2" With Steel Cross Shaft ring and orifice which allows the bearing to be installed in
ALL57832 ..... RH, 8" With Aluminum Cross Shaft custom applications that can be externally lubricated.
ALL57833 ..... LH, 8-1/2" With Aluminum Cross Shaft
ALL58001 ..... 5/8"
ALL58002 ..... 3/4"

www.allstarperformance.com 181