Page 190 - 2019 Allstar Performance Parts and Equipment Catalog

SUSPENSION Quick Adjust 14mm Bump Stop Kit

ALL64360
External Bump Stop Kit ALL56361
Kit makes it easy to start using
External bump stop kit allows adjustment of suspen-
bump stops. Includes a selec-
sion travel separate from the coil-over unit. The
detented adjuster nut can be turned on the rod
ranging from 50 to 75
end for quick adjustment. Each half turn equals 1/16"
durometer, 8 backing
eliminating the need for packer shims. Kit bolts to the tion of 20 bump stop pucks
outside of lower control arm and to an upper chassis washers and 16 packer
location (may need to drill a hole or use a clamp on shims in a simple plastic
bracket). Fine tune vehicle set-up by adjusting the upper carrying case.
bushing plate. Includes built-in travel indicator and two
yellow 75 durometer bushings. Will also accept bump
springs with 5/8" I.D. retainers (not included).
Bump Stop Components Bump Stop Pucks - 14mm
For Bilstein Shocks Pucks are replacement components found in
ALL64360 bump stop kit, in addition to other
Many bump stop options are durometer ratings for even more adjustability.
ALL64374
available today. These components ALL64276 2" O.D. pucks have a 1/2" I.D. hole suitable for 14mm
are for use with Bilstein shocks.
shocks as well as many other uses, including suspension
ALL64274 .....Bump Stop Lower Support For ALL64277 limiters.
Roller Skate Wheel Stops
ALL64275 .....Bump Stop Cup Fits The Bilstein Bump Stop Pucks 1/2" Tall 3/4" Tall 1" Tall
Rod End ALL64275 40dr Brown ALL64367 ALL64368 ALL64369
ALL64276 .....Rod Guide Protector Puts The Option 50dr Green ALL64370 ALL64371 ALL64372
Bump Stop Forces Into The Shock 55dr Orange ALL64373 ALL64374 ALL64375
Body, Not The Rod Guide 60dr Purple ALL64376 ALL64377 ALL64378
ALL64277 .....Splitter Washer Used To Separate ALL64274 65dr Black ALL64379 ALL64380 ALL64381
Stops On Stacked Stop Setups 75dr Yellow ALL64384 ALL64385 ALL64386

Shock Bump Rubbers
Conical bump rubbers fit on most shock shafts Aluminum Backing Washer ALL64366
up to 16mm to limit shock travel. Bump rub- Aluminum washer is designed for use with
bers are 2-3/8" tall and have a 2" O.D. base. 14mm bump stop pucks, as a backer washer
A letter designation is molded in the bottom or many other uses. Washer has a 2-1/4" O.D.,
to identify compound. 1/2" I.D. and is 3/16" thick.
ALL64500 ..... Soft (40 grams)
ALL64501 ..... Medium (50 grams)
ALL64502 ..... Hard (55 grams)
Bump Stop Shims - 14mm
Ride Height Set-Up Stick ALL10658 Place within the bump stop stack to limit suspension
Stick replaces the coil over shock and spring travel. 2" O.D. shims work
assembly during maintenance. Stick with most 14mm shocks.
has many uses and may be adjusted ALL64364 ..... 1/16" Shim
to check settings at normal ride ALL64365 ..... 1/8" Shim ALL64364 ALL64365
height, in race attitude or on the NEW!
bump stops to evaluate sus-
pension travel. Adjusts from
15" to 24", measured at the center of rod ends.
Shock Bump Covers
These neoprene covers are perfect for protecting
shock shafts and covering bump set ups. Fit 2"
O.D. shocks. Not for use with coil over springs.
ALL64216 ..... 10" Tall Cover
ALL64218 ..... 14" Tall Cover

Jimmy Mars Photo: Ken Kelly
188 www.allstarperformance.com