Page 242 - 2019 Allstar Performance Parts and Equipment Catalog

TOOLS & PIT EQUIPMENT

Bench Yoke ALL11360 Quick Change Tube
Bench yoke mounts to a work- Install/Removal Tool ALL11350
bench to hold transmissions, NEW! Finally, an
rear ends, differentials and easy and
many other items for assembly or servicing. correct way to install and remove
Yoke rotates 360 degrees and features two quick change axle tubes. Secure
10" long pivoting arms that are 1" wide by 1/2" support tool into a vice or to a
thick. Tool is unpainted so it can be modified as needed. workbench with optional
brackets. Components are
Rear End included to remove and install
Station Brackets tubes with the turn of a
wrench. An adapter for tubes
ALL10178
with Wide 5 or 5 x 5" hubs is
Stand adapter brackets also included.
fasten to adjustable arms
of most engine stands. Related Parts
Supports full size car and ALL11355 ...... Installation End Cap For ALL11355
light truck rear axle hous- Bolt-On and 2-7/8" Pin
Wide 5 Tubes
ings when servicing or Engine Stand ALL11351 ...... Mounting Bracket Kit For
replacing differential gear Not Included Quick Change Tube Install/
sets. Position housing Removal Tool ALL11351
onto arms and secure
into place with included retaining straps. Axle Spline Tool ALL66104
Tool clamps in a vise to hold
Pinion Centering Jig 31-spline axles. Assures perfect
ALL68370 alignment for maintenance or
installation of axle plugs used with
Pinion centering jig fastens to the rear end Gold-Trac differentials.
housing and locates the pinion center-
line when building or narrowing housings.
Machined slots are designed to retain most T-Handle Axle Puller
tape measure ends for accurate measure- ALL66115
ments. Applications include GM 12 and All-in-one T-handle puller
14-Bolt, Dana 44 and 60, Chrysler 8-3/4" and, threads into axle for easy instal-
Ford 8.8" and 9" housings. lation or removal. Tool includes
adapters to fit 3/8"-16 coarse
Pinion Yoke or 3/8"-24 fine thread solid axles, and 3/4"-16 fine thread
Wrench ALL68372 gun-drilled axles.
Wrench fastens to most
popular pinion flanges Extreme Pressure Lube ALL78246
and companion flanges to Originally used throughout the tool and
hold when setting bearing die industry, this lube provides
pre-load and tightening superior durability and wear
retaining bolt or nut. Wrench has provisions to work with protection, taking the place
1/2" or 3/4" drive tool. Center hole is 2" to clear most of anti-seize in many applications. Recommended for
sockets. Universal slotted bolt patterns for 1/4", 5/16" and spline-to-spline contact, threaded adjusters and engine
3/8" fasteners for most AMC, Dana, Ford and GM yokes. fasteners. 4 ounce tube.
Spindle Nut Sockets Quick Change Oil Plug Sockets
Aluminum hex style spindle nut sockets fit Six-point sockets fit on a 1/2" drive ratchet
1/2" socket wrenches. to remove or install plugs on quick change
ALL10110 ...... 2-3/8" Spindle Nut Socket For 2" Pin, rear ends. Small socket fits plugs in most center ALL11161
Allstar, PCR 5x5 And Most Wide 5 Hubs sections and side bells. Large socket fits plug in
ALL10115 ...... 2-7/8" Spindle Nut Socket For 2-1/2" Pin, Allstar, Winters Ford 9" housings. Not recommended for high
AFCO, Winters And SCP 5x5 Hubs torque applications.
ALL11160 ...... Small, 1-3/8", Blue Anodized
ALL11161 ...... Large, 1-7/8", Red Anodized

240 www.allstarperformance.com