Page 105 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

SUSPENSION

TITANIUM SHOCK QUICK PINS PANHARD BARS
Titanium shock quick pins allow coil-over shocks to be quickly Panhard bars
serviced or changed. ALL17120 has a long shoulder and will are formed from
work with Allstar coil-over brackets eliminating the need ALL17120 1.250" tubing with 3/4"-16 threads in each end. For use
for a separate bushing. ALL17121 is commonly used on non- with 3/4" RH rod ends and clamp-on brackets (ALL60180 or
bushing type brackets, but can be used with Allstar brackets along ALL60181). Center-to-center length reference is figured including
with bushing. Shock quick pins are 2-1/2" long and include a hairpin. rod ends. Rod ends sold separately.
Part No. Description Part No. Description
ALL17120 Quick Pin With Shoulder ALL17121 ALL56146 29" Center-To-Center
ALL17121 Quick Pin Without Shoulder ALL56147 30-1/2" Center-To-Center
ALL56148 32-3/4" Center-To-Center
SUSPENSION LIMITER
Single bushing suspension limiter is commonly used on ADJUSTABLE J-BAR STYLE
the chassis LR or RR to limit travel during acceleration PANHARD
“hike up” and control roll steer. Double bushing limiter BARS
is often used on the lift bar to control lift bar travel on Bars are formed from
deceleration. Bushing design reduces or absorbs shock 1-1/2" steel tubing and mount to the pinion rather than the axle tube to
when suspension is limited and helps reduce tire unload- maintain adequate driveshaft clearance. J-bars have 3/4" rods ends and
ing. Top plate is drilled to attach a 1/2" rod end when used in a allow up to 2" of adjustment.
shock mount or for attaching to a weight jack bolt with 7/16"-20 Part No. Drop Description
internal threads using optional chrome moly stud ALL64304. ALL56155 4" 17-1/2"-19-1/2", 6.2 Lbs.
Clevis has a 3/8" hole for simple attachment to a chain or cables. ALL56156 4" 19-1/2"-21-1/2", 6.2 Lbs.
Part No. Description ALL56153 6" 17-1/2"-19-1/2", 6.7 Lbs.
ALL64300 Single Bushing Limiter ALL56154 6" 19-1/2"-21-1/2", 7.0 Lbs.
ALL64302 Dual Bushing Limiter
ALL64304 Chrome Moly Stud With Jam Nut Part No. Description
Replacement Parts
ALL99050 Replacement Threaded Adjuster
Adjuster Nut
LIMITER CHAIN KITS ALL99052 3/4" Male Moly Rod End
ALL58072
Commonly used to limit rear suspension or lift
bar travel. Chain kit will accept a bolt or pin or J-BAR STYLE PANHARD BAR
may be modified to accept up to a 1/2" bolt. Offered in
3/16" or 5/16" x 18" long, chain may be easily cut to WITH RUBBER CENTER ALL56157
required length. Shrink sleeve installs over chain and ALL64314 Adjustable J-bar style Panhard bar has a rubber
when heated with a heat gun shrinks to keep chain in center to cushion side loading and
position, preventing binding or catching. improve handling. Bar is 1-1/2" dia.
Part No. Description steel tubing. Center-
ALL64312 Limiter Chain Kit, 3/16" x 18" Long to-center length
adjusts from 18-1/2" to 23".
ALL64314 Limiter Chain Kit, 5/16" x 18" Long
Related Component Part No. Description
ALL64313 3/16" x 18" Long Chain Only Replacement Parts
ALL18440 Washer
ALL56162 Rubber Bushing
AXLE TUBE BRACKET ALL68324 ALL99051 Threaded Rod
Bracket clamps around 3" wide axle tubes providing a
mounting point for a suspension limiter such as a limiting PANHARD BAR SPACERS
strap or chain. 1" wide bracket has tabs with 1/2" holes. Spaces Panhard bar away from rear mounted power
steering, brackets, etc. Aluminum or steel. 3/4" I.D.
Part No. Description
CLAMP-ON RINGS ALL56144 Aluminum
Steel brackets bolt to 3" axle tubes. Choose from five widths in 1-, 2- and ALL56145 Steel ALL56145 ALL56144
4-bolt designs.
CUT-TO-FIT J-BAR STYLE PANHARD BARS
Cut-to-fit bar is an
unwelded kit offering
the ability to build a custom length J-Bar
ALL60143 ALL60145 with up to a 27" long center to center distance, enough to work with most
Part No. Description chassis. Bar is formed from .250" wall 1-1/2" steel tubing, has a 4" drop,
ALL60143 1-Bolt, 5/8" Wide includes a threaded insert and rod ends.
ALL60144 2-Bolt, 1" Wide Part No. Description
ALL60145 2-Bolt, 1-3/4" Wide ALL56141 Bar With Standard Rod Ends
ALL60146 2-Bolt, 2" Wide ALL56142 Bar With Aircraft Rod Ends
ALL60147 4-Bolt, 3" Wide ALL56143 Replacement 3/4"-16 Insert

104