Page 103 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

SUSPENSION

2.5" COIL-OVER KITS SHOCK PROTECTORS
Kits include everything to assemble one Shock Protectors add extra protection from rocks and debris to your
complete shock. Slotted tops allow quick shock body. Plastic protector simply snaps onto your shock body. May
and easy spring changes. Kits are for 2.5" need to be cut to length. Sold each.
coil-over springs and are designed for Part No. Description
use with 2" steel bodied shocks unless ALL64202 2" Standard Body Shocks
specified. ALL64141 ALL64203 1-5/8" Small Body Shocks
Kit
Shock Number SHOCK AND
AFCO
Kit With 7" Sleeve ALL64141 PULL BAR COVERS
Bilstein Neoprene covers help protect from rock
Kit With 7" Sleeve ALL64143 damage and to keep components clean while
Fox preventing the competition from knowing
Kit With 7" Sleeve ALL64130 your secrets. Hook and loop material allows
Kit For Track Evolution Series With 7" Sleeve ALL64131 easy cover removal for adjustments. 3" cov-
Kit For Aluminum Threaded Body ALL64132 ers are often used for 2.5" and 3" coil-over
Integra shocks and small diameter upper links. 6"
(Avenger) Kit With 7" Sleeve ALL64158 covers work well on 5" springs and pull bar
Kit For Aluminum Threaded Body ALL64157 applications.
JRI Part No. Description
Kit With 7" Sleeve ALL64136
Koni ALL64204 3" x 14" Cover
Kit With 5" Sleeve ALL64146 ALL64205 3" x 16" Cover
Kit With 7" Sleeve ALL64147 ALL64206 6" x 7" Cover
Penske ALL64207 6" x 14" Cover
Kit With 7" Sleeve ALL64149 ALL64208 6" x 16" Cover
Pro
Kit With 7" Sleeve ALL64151 SHOCK EXTENSIONS
QA1 Steel extensions fasten directly to shock shaft for added suspension travel.
(50 Series) Kit With 7" Sleeve ALL64145 Sold each.
Kit For Aluminum Smooth Body With 7" Sleeve ALL64154 Part No. Description
Part No. Description M12-1.0 Thread (Bilstein)
Related Products ALL60096 1" Extension
ALL64182 2.5" C/O Diaper Pin ALL60097 2" Extension
ALL64183 Snap Ring Flat (Koni) 7/16"-20 Thread (Fox)
ALL64184 Snap Ring Round ALL64182 ALL64183 ALL60098 1" Extension
ALL64186 Snap Ring (Fox) ALL60099 2" Extension

COIL-OVER THRUST BEARING KIT SHOCK CANISTER MOUNTS
ALL64210 At last a shock canister mount that fits all common shock canisters.
Kit installs between the spring and the coil- Aluminum construction mount is rubber padded to protect shock canister and
over nut to enable easier turning of the nut under increase holding strength. Adjustable quick release nylon strap will secure any
pressure. A must with coil bind, soft spring setups. shock canister from 1-1/2" to 3" in diameter.
2.5" I.D. x 3.25" O.D. Part No. Description
ALL64270 1-1/4" Tubing
5" COIL OVER ADAPTER ALL64269 1-3/8" Tubing
1-1/2" Tubing
ALL64271
ALL64185 ALL64272 1-3/4" Tubing
Aluminum adapter converts Replacement Parts
existing coil over kit from a ALL99295 Release Pin
2.5" spring to a 5" spring. Sold ALL99296 Retainer Strap
each, two are typically required.

SHOCK PROTECTORS COIL-OVER ELIMINATOR
Plastic shock protectors slide over aluminum threaded ALL64100
body shock to protect against wear from spring. Protec- Eliminator fits conventional 5" coil springs. Adjuster locks spring
tor measures 6" from spring seat to end, has an I.D. that into place. Kit includes a threaded shaft, two spring plates, one
measures 2.25" and works with all 2.5" I.D. springs. adjuster, two rod ends and two jam nuts. Easily adjusted with Allstar
Unit should just cover shock body and may need to be ALL11146 wrench. Not to be used as a suspension limiting device,
cut to specific length. check maximum travel before use.
Part No. Description
ALL64200 Blue
ALL64201 Black

102