Page 101 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

SUSPENSION

SWAY BAR BOLTS SWAY BAR ARMS
Bolts have 7/8"-9 Splined sway bar arms are made from 3/4" thick mild steel.
threads and are available Arms are available straight, in 15 degree or 30
in a fixed or swivel end degree drop. Arms can be cut to length
design. Swivel end bolts and bent to fit any width chassis.
have a 1/2" square drive Includes pinch bolt.
end for quick and easy ALL56384 ALL56386
adjustments. ALL56385 ALL56387
Non-Swivel Swivel Eye Eye Center To
Part No. Description Eye I.D. Eye O.D. Width End Of Threads 15-1/4" 15-1/4"
ALL56070 Steel Swivel 1-5/8" 2" 1-1/8" 11-1/2" ALL56388
ALL56071 Steel Swivel 2" 2-3/4" 1-1/8" 12" ALL56389
ALL56100 Steel Non-Swivel 1-1/2" 2" 1-1/8" 11-1/2" 15-3/4"
ALL56102 Steel Non-Swivel 2" 2-3/4" 1-1/8" 12"
Part No. Description Spline
Part No. Description ALL56384 30 Deg. Drop 1-1/4" x 49
Related Components ALL56385 30 Deg. Drop 1-1/2" x 48
ALL18266 Lock Nut For ALL56100-56102 ALL56386 15 Deg. Drop 1-1/4" x 49
ALL56072 Weld Nut For ALL56070-56071 ALL56387 15 Deg. Drop 1-1/2" x 48
ALL56072 ALL56388 Straight 1-1/4" x 49
ALL56389 Straight 1-1/2" x 48

ADJUSTABLE SWAY BAR BOLT KIT GROUND CLEARANCE
ALL56103 INDICATOR ALL10725
Kit includes a 3-5/8" long sleeve that welds into frame rail with a Determine how close the frame is to ground on the race
locking collar to prevent movement. Adjustment bolt has 4" of travel and track. These unique kits feature an aluminum bracket that
adjusts with a 1/2" square drive ratchet. Inside eye diameter 1-1/2". rivets to the frame with an adjustable plastic wear rod. Sold
each.
Part No. Description
Replacement Component
ALL10726 Wear Rods, 4-Pack
EXTERNAL BUMP STOP KIT
ADJUSTABLE SWAY BAR MOUNT KITS ALL56360
For Camaro and mid-size GM-based circle track For use with Big Bar/Soft Spring set-ups, kit allows adjustment
cars. Mount sway bar in stock location, or below the of suspension travel separate from the coil over unit. Bolt kit to the
A-arm for extra steering clearance. Urethane bush- outside of lower control arm and to an upper chassis location (may
ings reduce bind, and can be used with bars up need to drill a hole or use a clamp on bracket). 15.5" long with
to 1-1/4" dia. Sway bar (ordered separately) must 1.5" of adjustment. Fine tune vehicle set-up by adjusting the upper
be turned over when mounting below A-arm. bushing plate. Includes built-in travel indicator and two yellow
Bolt centerline spacing is 2-3/4". bushings.
Part No. Description Part No. Description
ALL56104 Standard SAE Threads Replacement Component
ALL56105 1978-Up GM Metric Threads ALL56372 Bushing
ADJUSTABLE SWAY BAR ARMS BUMP STOP KIT
Kit includes a CNC-machined aluminum adjuster and a 17.5" long steel arm. ALL64320
Adjuster is available in 30 degree or zero drop with 1-1/4" x 49 or 1-1/2" x Kit makes it easy to start using bump
48-spline. On cars with limited ground clearance, the zero drop kit positions stops. Includes a selection of 20 bump
the arm at the center line of the adjuster for additional ground clearance. stop pucks ranging from 50 to 75 durom-
Adjustment bolt has detents to lock at each half turn.
eter, 8 backing washers and 16 packer
shims in a simple plastic carrying case.
ALL64334
16MM BUMP STOP PUCKS
ALL56380 Pucks are replacement components found in ALL64320 Bump
ALL56382 Stop Kit in addition to other durometer ratings for even more
Part No. Description Material adjustability. 2" O.D. pucks have a 5/8" I.D. hole suitable for 14
ALL56380 RH 30 Degree Drop 1-1/4" x 49 and 16mm shocks as well as many other uses including suspension limiters.
ALL56381 RH 30 Degree Drop 1-1/2" x 48 Bump Stop Pucks 1/2" Tall 3/4" Tall 1" Tall
ALL56382 RH Zero Drop 1-1/4" x 49 40dr Brown ALL64327 ALL64328 ALL64329
ALL56383 RH Zero Drop 1-1/2" x 48 50dr Green ALL64330 ALL64331 ALL64332
55dr Orange ALL64333 ALL64334 ALL64335
60dr Purple ALL64336 ALL64337 ALL64338
65dr Black ALL64339 ALL64340 ALL64341
75dr Yellow ALL64344 ALL64345 ALL64346

100