Page 27 - 2020 Allstar Performance Parts and Equipment Catalog
P. 27
BRAKE
40 Vane Directional Rotors Rotor Spacer
Heavy duty 40 vane brake rotors provide For Dirt Late Models
added strength and cooling over standard Minimize caliper damage from debris
36 vane rotors. 11.75" x 1.25" 8 bolt rotors and maximize cooling capabilities. Rotor
weigh just 11 pounds and have ball milled spacer bolts to a Wide 5 hub, moving
slots to keep rotor clean. the rotor/caliper inboard and out of
ALL42004 ..... LH 1.25" x 11.75" 8-Bolt the wheel shell. When used on the left
ALL42005 ..... RH 1.25" x 11.75" 8-Bolt rear corner, spacer also helps reduce caliper
ALL42004
damage from this common debris area. Made
from 6061 aluminum and includes eight
36 Vane Directional Rotors mounting bolts.
Rotors have 36 directional cooling vanes ALL42014 ..... 1.75" Rotor Spacer
and are 1-1/4" thick x 11-3/4" diameter ALL42016 ..... 2.25" Rotor Spacer
Directional cooling vanes allow brakes to
run much cooler than conventional rotor Inner Mud Shield ALL44148
designs. Rotors fit solid mounting brake hats Aluminum shield attaches to the axle
or hubs.
tube to help prevent dirt build-up in the
ALL42000 ..... LH 1.25" x 11.75" 8-Bolt backside of the left rear wheel. Shield
ALL42001 ..... RH 1.25" x 11.75" 8-Bolt works with most 15" wheels and
includes mounting hardware.
Rotor Bolt Kit ALL42026 Replacement Part
ALL44149 ..... Replacement Shield
Grade 5, 5/16" bolts fasten disc brake
rotors to rotor hat or hub. Includes ten Mustang II Caliper Brackets
bolts, ten washers and ten self-locking
nuts. Install 11" Granada style rotors and GM
Metric style calipers on stock height or low-
ered Mustang II spindles with these bolt-on
caliper brackets. Lightweight steel brackets
Stamped Steel Rotor Hat
weigh just over one pound each and are sold ALL42111
ALL42120 individually. Commonly used on Modifieds and stock cars.
Brake hat fits 8-bolt rotors with 7" bolt ALL42110 ..... LH Caliper Bracket
circle mount. Made of stamped steel ALL42111 ...... RH Caliper Bracket
with a 3" offset and drilled for 4-1/2",
4-3/4" and 5" bolt circles. Hat has 3.060" diameter cen- Hybrid Mustang II
tering hole and fits axle flanges with up to 5.75" diam- Caliper Brackets
eter. Drilled for 1/2" wheel studs. IMCA Legal.
Install smaller hybrid style rotors and inter-
mediate GM Metric style calipers on stock
height or lowered Mustang II spindles with
Cast Aluminum Rotor Hats these bolt-on caliper brackets. Lightweight
Cast aluminum hats are available in two steel brackets weigh just one pound each
offsets, fit 8-bolt rotors with 7" bolt and are sold individually. Commonly used ALL42118
circle mount, have a 3.060" diameter on Modifieds and stock cars.
centering hole and fit axle flanges with up ALL42118...... LH Hybrid Caliper Bracket
to 6.050" diameter. Drilled for 1/2" studs. ALL42129 ALL42119...... RH Hybrid Caliper Bracket
ALL42129 ..... 2-1/2" Offset, 2.2 Lbs.
ALL42128 ..... 3" Offset, 2.5 Lbs. GM 7.5" Rear Caliper Brackets
Steel bolt-on brackets
are used when
converting drum
brake equipped ALL42180 ALL42181
7.5" GM style rear ends
to disc brakes. 1/4" thick
brackets replace the
drum brake backing plates to provide secure mounting
for standard intermediate metric calipers (ALL42083 and
ALL42084).
ALL42180 ..... LH Bracket
ALL42181 ..... RH Bracket
Andy Barr Photo: Marcus Berglund
www.allstarperformance.com 25
