Page 28 - 2020 Allstar Performance Parts and Equipment Catalog

BRAKE Brake Wilwood Superlite

Floater Brackets
Lightweight aluminum caliper bracket
Steel brackets for use on Caliper Bracket ALL42134
the left rear suspension bolts together for easy installation to a
with GM Metric calipers. 3" O.D. axle tube without removing the
rear hub assembly. Specially designed to mount
a Wilwood Superlite caliper with 3-1/2" bolt spacing to
ALL42187 ALL42188
ALL42187 ..... Bracket With Liner axle tube when using a 11-3/4" diameter brake rotor.
ALL42188 ..... Bracket With 2 Bearings Additional locking bolts install into axle tube to help pre-
vent bracket from rotating.

Rear Caliper Brackets
ALL42186
Made from 1/4" thick steel, Superlite Caliper Bracket
brackets fit 3" diameter ALL42102
axle housings and work For Bolt On Snouts ALL42137
with 11.75" diameter rotors. For use with 8-bolt axle tubes and bolt
Available for many setups. on snouts where there is no room for
a bracket to clamp on the tube. This bracket mates
Clamp-On Brackets between the tube and the snout and has multiple holes
ALL42101 .....Big GM, 7" Spacing for preference of caliper location.
ALL42103 .....GM Metric, 5-1/2" Spacing, Wide Clamp
ALL42185 ..... GM Metric, 5-1/2" Spacing, Narrow Clamp
ALL42186 .....GM Metric, 5-1/2" Spacing, Narrow Clamp With
Reinforcing Gussets Brake Line Deflectors
ALL42105 .....Wilwood Dynalite, 5-1/4" Spacing
ALL42109 .....Wilwood Superlite, 3-1/2" Spacing Deflectors mount on caliper or
spindle on an open wheel car to ALL50250
Weld-On Brackets protect brake lines and fittings from
ALL42100 .....Big GM Style, 7" Spacing damage. Sold each.
ALL42102 .....GM Metric, 5-1/2" Spacing
ALL42104 .....Wilwood Dynalite, 5-1/4" Spacing ALL50250 ..... LH Deflector
ALL42108 .....Wilwood Superlite, 3-1/2" Spacing ALL50251 ..... RH Deflector ALL50251

GM Metric Caliper Bracket Brake Calipers
ALL42133 Stock style calipers are perfect replace-
3-piece modular bracket has the ments on most GM vehicles and will fit
caliper bracket bolted separately up to 1" wide rotor. Metric inlet thread
for easy installation to a 3" axle is 10mm x 1.50 pitch. Big GM inlet
tube without removing the rear hub thread is 7/16"-20.
assembly. Specially designed to mount a GM Metric ALL42081 ..... RH 1973-77 Big GM
caliper with 5-1/2" bolt spacing to axle tube when using ALL42082 ..... LH 1973-77 Big GM
a 11-3/4" diameter brake rotor. Additional locking bolts ALL42083 ..... RH 1978-87 Metric GM
install into axle tube to help prevent bracket from rotating. ALL42084 ..... LH 1978-87 Metric GM
Note: We reference RH (right-hand) or LH (left-hand) based on the caliper being
mounted behind the rotor, however, all calipers may be mounted on the front or
backside of the rotor.
Ford 9" Axle Spacer Plates
Spacer plate takes the place of drum
brake backing plate and properly pre- GM Caliper Bolts ALL42079
loads the tapered style axle bearing.
Spacers fit large bearing Ford 9" Replacement caliper bolts fit most
housing ends. Sold each. ALL72318 GM calipers and allow for easy ALL42080
ALL72318 ..... Late Torino Style installation and removal. Bolts
ALL72319 ..... Early Style feature a built-in sleeve to allow for
extra caliper travel. Package of 2.
Related Item ALL42079 ..... Socket Head, 3/8" Allen
ALL72042 ..... Backing Plate T-Bolts (Late Style), 8-Pack
ALL42080 ..... Hex Head, 5/8" Wrench

26 www.allstarperformance.com