Page 175 - 2018 Racecar Engineering Engine Parts and Accessories Catalog

CYLINDER HEADS

Chrysler Small Block 318-360 (Cont.)
Edelbrock
E-CNC Victor 16° Aluminum Head
The E-CNC Victor Small Block Mopar head is completely redesigned for bracket rac-
ers and serious enthusiasts. 100% CNC-machined to improved air flow of 325CFM @
.600" lift with an in-line valve design of 16 degrees and a .750" raised, 225cc intake ports while the flange was extended to
accommodate a stock or a Super Victor race intake manifold. The new design features large 77cc raised exhaust ports with
a W5 bolt pattern exhaust flange. Intake end-seal spacers are provided.
Part No. Description Intake Runner Comb. Chamber Valve Angle Intake Valve Exhaust Valve
EDE61709 Bare Head 225cc 58cc 16° 2.150" 1.600"
Note: These heads are designed to use Big Block Wedge rocker arm assemblies. Sold Individually.

Chrysler Big Block 383-440

Edelbrock Performer RPM
Aluminum Head
Engineered to replace 1961-78 361-440 wedge cylinder head. Angle plug type is fitted with
bronze valve guides and ductile valve seats. Sold individually bare, or assembled with stain-
less valves and springs to accommodate up to .600" valve lift. Sold individually. EDE60929
Part No. Description Intake Runner Comb. Chamber Valve Angle Intake Valve Exhaust Valve
EDE60189 Assembled 210cc 88cc 15° 2.140" 1.810"
EDE60917 Bare 210cc 82-84cc 15° 2.250" 2.000"
EDE60919 Bare 210cc 84cc 15° 2.140" 1.810"
EDE60925 Assembled, 1.550" Dual Spring 210cc 84cc 15° 2.140" 1.810"
EDE60929 Assembled 210cc 84cc 15° 2.140" 1.810"

Edelbrock E-Street 440 Chrysler EDE5059
The Edelbrock E-Street 440 Chrysler aluminum cylinder replace 1961-78, 361-440 wedge
cylinder head. Features include; improved combustion 75cc or 84cc chambers allow head
to be used with stock pistons, 210cc intake runners, 70cc exhaust ports, 2.140" intake
valves, 1.81" exhaust valves, manganese-bronze valve guides, 5/8" thick deck and stock
exhaust port flange bolt pattern. Sold in pairs.
Part No. Description Intake Runner Comb. Chamber Valve Angle Intake Valve Exhaust Valve
EDE5090 Assembled, 1.550" Dual Spring 210cc 75cc 15° 2.140" 1.810"
EDE5093 Assembled, 1.550" Dual Spring 210cc 84cc 15° 2.140" 1.810"

Edelbrock Victor Aluminum Head
Victor Big Block Chrysler heads feature .650" raised intake ports and .250" raised exhaust
ports for improved flow, and dual quench 75cc combustion chambers. Existing Victor intake
may be used on high or low deck blocks. Sold individually.
EDE77919
Part No. Description Intake Runner Comb. Chamber Valve Angle Intake Valve Exhaust Valve
EDE77919 Bare, Victor 280cc 75cc 15° 2.200" 1.810"
EDE77929 Assembled, Victor 280cc 75cc 15° 2.200" 1.810"

Edelbrock Victor
Max Wedge Aluminum Head
Heads are machined to match Max Wedge intake manifolds for B/RB big-blocks. Intake ports are
raised .650" and exhaust ports are raised .250". Intake flange is extended .950" to eliminate the
need for intake spacers and the exhaust flange is extended .300" from stock.
Part No. Description Intake Runner Comb. Chamber Valve Angle Intake Valve Exhaust Valve
EDE77939 Bare, Max Wedge Head 290cc 75cc 15° 2.200" 1.810"
EDE77949 Assembled, Max Wedge Head 290cc 75cc 15° 2.200" 1.810"

174 2018 ENGINE BUILDER CATALOG