Page 28 - 2018 Allstar Performance Parts and Equipment Catalog

BRAKE Brake Wilwood Superlite

Floater Brackets
Lightweight aluminum caliper bracket
Steel brackets for NEW! Caliper Bracket ALL42134
use on the left bolts together for easy installation to a
rear suspension with 3" O.D. axle tube without removing the
GM metric calipers. rear hub assembly. Specially designed to mount
a Wilwood Superlite caliper with 3-1/2" bolt spacing to
axle tube when using a 11-3/4" diameter brake rotor.
ALL42187 ALL42188
ALL42187 ..... Bracket With Liner Additional locking bolts install into axle tube to help pre-
ALL42188 ..... Bracket With 2 Bearings vent bracket from rotating.

Rear Caliper Brackets Superlite Caliper Bracket
ALL42186
Made from 1/4" thick steel, For Bolt On Snouts ALL42137
brackets fit 3" diameter ALL42102 For use with 8-bolt axle tubes and bolt
axle housings and work on snouts where there is no room for a
with 11.75" diameter rotors. bracket to clamp on the tube. This bracket
Available for many setups.
mates between the tube and the snout and has multiple
Clamp-On Brackets holes for preference of caliper location.
ALL42101 .....For Big GM Style Calipers, 7" Spacing
ALL42103 .....For GM Metric Calipers, 5-1/2" Spacing, Wide Brake Line Deflectors
Clamp
ALL42185 ..... For GM Metric Calipers, 5-1/2" Spacing, Narrow Deflectors mount on caliper or
Clamp spindle on an open wheel car to ALL50250
ALL42186 .....For GM Metric Calipers, 5-1/2" Spacing, Narrow protect brake lines and fittings from
Clamp With Reinforcing Gussets damage. Sold each.
ALL42105 .....Wilwood Dynalite Calipers, 5-1/4" Spacing ALL50250 ..... LH Deflector
ALL42109 .....Wilwood Superlite Calipers, 3-1/2" Spacing
ALL50251 ..... RH Deflector ALL50251
Weld-On Brackets
ALL42100 .....For Big GM Style Calipers, 7" Spacing Brake Calipers
ALL42102 .....GM Metric Calipers, 5-1/2" Spacing Stock style calipers are perfect replace-
ALL42104 .....Wilwood Dynalite And Sierra Mini GN Dual
Calipers, 5-1/4" Spacing ments on most GM vehicles and will fit
ALL42108 .....Wilwood Superlite And Sierra XL Calipers, 3-1/2" up to 1" wide rotor. Metric inlet thread
Spacing is 10mm x 1.50 pitch. Big GM inlet
thread is 7/16"-20.
GM Metric Caliper Bracket ALL42081 ..... RH 1973-77 Big GM
ALL42133 ALL42082 ..... LH 1973-77 Big GM
3-piece modular bracket has the ALL42083 ..... RH 1978-87 Metric GM
ALL42084 ..... LH 1978-87 Metric GM
caliper bracket bolted separately
for easy installation to a 3" axle tube Note: We reference RH (right-hand) or LH (left-hand) based on the caliper being
mounted behind the rotor, however, all calipers may be mounted on the
without removing the rear hub assembly. Specially front or backside of the rotor.
designed to mount a GM metric caliper with 5-1/2" bolt ALL42079
spacing to axle tube when using a 11-3/4" diameter brake GM Caliper Bolts
rotor. Additional locking bolts install into axle tube to help Replacement caliper bolts fit most
prevent bracket from rotating. GM calipers and allow for easy instal- ALL42080
lation and removal. Bolts feature
Ford 9" Axle Spacer Plates a built-in sleeve to allow for extra
Spacer plate takes the place of drum caliper travel. Package of 2.
brake backing plate and properly pre- ALL42079 ..... Socket Head, 3/8" Allen
loads the tapered style axle bearing. ALL42080 ..... Hex Head, 5/8" Wrench
Spacers fit large bearing Ford 9" ALL72318
housing ends. Sold each. Brake Caliper Bolt
ALL72318 ..... Late Torino Style Retainer Kit ALL42050
ALL72319 ..... Early Style Aluminum kit places lower plate (with
Related Item retainer clip) under the caliper mounting
ALL72042 ..... Backing Plate T-Bolts (Late Style), 8-Pack bolts. The upper plate (with hex hole ends)
clips into place and slips over bolt heads to prevent them
from turning. Includes 5/8" hex head bolts. 3-1/2" bolt
spacing.

26 www.allstarperformance.com