Page 32 - 2018 Allstar Performance Parts and Equipment Catalog

BRAKE Plunger Style Proportioning Valve ALL48025

Brake Light Switch
twist of a knob. Provides up to
ALL76253 Adjust front-to-rear brake bias with the
Popular two terminal brake light switch found in most 57% reduction. Fitting ports are
1/8"NPT. Valve includes two fittings
vehicles from the 1950’s to today. Ideal for most applica- to adapt to 3/16" brake line. 1" long,
tions, switch is spring loaded to the on position and turns 1-3/4" wide and 3-5/16" tall.
off when contacted by the brake pedal assembly. Switch
has 1/2" threads with jam nuts for easy mounting in a
bracket, and two .250" blade type terminals. Combination Valves
Multi-purpose valves are used in the
Lever Style brake system to properly distribute
fluid to the front and rear brakes,
Brake Light Switch ALL76250 meter the amount of fluid and pressure ALL41040
Switch is commonly used with under- delivered to each brake and provide an option to connect
floor mounted brake pedal assemblies a warning light to alert in case of brake failure.
when switch can contact the brake pedal arm. ALL41040 ..... Disc/Drum
Spring loaded switch is designed to return to ALL76250 ALL41042 ..... Disc/Disc
the open position and has two #10-32 tapped
mounting holes, 5/8" on centers. Designed for easy two Related Part
wire connection, one "+" supply and the other to power ALL41044 ..... Connector For Warning Light ALL41044
brake lights or a brake light relay. Switch is rated at 4.5
amps and features two male bullet terminals. Combination Valve Mounting Brackets
Brackets provide a secure mount for combination
Pressure Activated valves allowing them to be mounted to the
frame or directly under the master
Brake Light Switches cylinder providing access to lines
Switch is plumbed into the brake and fittings. ALL41046
system and is activated by closing ALL76252 ALL76251 ALL41045 ..... Horizontal Mount Bracket
the electrical connection with rising brake pressure (60- ALL41046 ..... Vertical Mount Bracket
120 PSI). Designed for easy two wire connection, one "+"
supply and the other to power brake lights or a brake light Brake Pressure
relay. Switches are rated at 4.5 amps and have 1/8"-27 dry
seal mounting threads. Safety Switch ALL76255
ALL76251 ..... Male Bullet Terminals Brake pressure switch is wired into the
ALL76252 ..... 6-32 Screw Terminals ignition system and kills power to ignition
when a sudden spike in brake pressure
Residual Check Valves is sensed during the event of an accident
or emergency. Switch has an adjustable cut-off pressure
Residual check valves hold from 700-1900 PSI and resets automatically when brakes
a small amount of pressure are released. A weatherproof cover protects the inner
in the brake system to keep adjustment screw and seals the 18" long pigtail leads.
the brake system functioning ALL41048 1/8"NPT male threads.
properly while helping
to maintain a firm pedal.
Maintaining system pressure Electric Line Lock Kit
prevents fluid from returning ALL41049 An electrically controlled valve
to the master cylinder when the master cylinder is that engages with a switch,
positioned lower than or close to the same height as the holds pressure to the front
calipers or wheel cylinders. Proper system pressure also brakes on drag race vehicles.
keeps piston and wheel cylinder seals expanded creating Commonly used to prevent ALL48012
a positive seal and brake pads seated against the rotor. vehicles from rolling once they have staged or
Valves include two 3/16" inverted flare fittings. during burn outs in the water box. Detailed installation
ALL41048 ..... 2 Lb. For Disc Brakes instructions included.
ALL41049 ..... 10 Lb. For Drum Brakes ALL48012 ..... Electric Line Lock Master Kit
ALL48013 ..... Electric Line Lock Kit With Fittings
ALL48014 ..... Electrical Hardware Kit

30 www.allstarperformance.com