Page 35 - 2018 Allstar Performance Parts and Equipment Catalog

BRAKE

Steel Brake Line Inverted Flare Nuts
Steel brake line is available in lengths from 8" to 72" 3/16" and 1/4" flare nuts are used for building
for plumbing brake systems. Standard galvanized zinc custom brake lines. Nuts are available to fit most
coating. master cylinders and metering/proportioning valves. Select
proper thread size for line used.
Part No. Size Color Qty.
3/16" Line 1/4" Line Flare Nuts For 3/16" Brake Line
Length With 3/8"-24 Ends With 7/16"-24 Ends ALL50110 3/8"-24 Zinc Plated 10-Pack
8" ALL48048 ALL48064 ALL50111 3/8"-24 Stainless 10-Pack
12" ALL48050 ALL48066 ALL50113 7/16"-20 Red 2-Pack
20" ALL48052 ALL48068 ALL50114 1/2"-20 Green 2-Pack
30" ALL48054 ALL48070 ALL50115 9/16"-18 Olive 2-Pack
40" ALL48056 ALL48072 Flare Nuts For 1/4" Brake Line
51" ALL48058 ALL48074 ALL50116 7/16"-20 Zinc Plated 10-Pack
60" ALL48060 ALL48076 ALL50117 7/16"-20 Stainless 10-Pack
72" ALL48062 ALL48078 ALL50118 1/2"-20 Gold 2-Pack
ALL50119 9/16"-18 Blue 2-Pack
Stainless Steel Brake Line
304 Grade stainless steel line exceeds SAE and DOT Tubing Cutters ALL11010
requirements. Pre-made lines include standard size stain- Cut plastic, aluminum,
less ends for years of service and show quality finish. copper or steel tubing
without distorting or ALL11011
crushing. Standard
cutter works with tubing from 1/8" up to 1-1/8" and has
3/16" Line 1/4" Line wide rollers for even tracking of cutter wheel, built in
Length With 3/8"-24 Ends With 7/16"-24 Ends reamer for cleaning inside of tubing and an extra cutting
8" ALL48300 ALL48310 wheel. Mini cutter can cut tubing from 1/8" to 5/8" in
12" ALL48301 ALL48311 tight areas.
20" ALL48302 ALL48312
30" ALL48303 ALL48313 ALL11010 ...... Mini
40" ALL48304 ALL48314 ALL11011 ...... Standard
51" ALL48305 ALL48315
60" ALL48306 ALL48316 Double Flare Tool ALL11015
72" ALL48307 ALL48317
Double flares 3/16", 1/4", 5/16", 3/8" and
1/2" steel or aluminum and
Coiled Tubing .040" copper tubing at 45
Coiled tubing works great for degrees, the most common
building custom length brake lines flare used in custom length brake and
without unions. Tubing is easily cut fuel lines. Includes instructions and a plastic storage case.
and flared to desired length. Stainless
tubing is 304 grade and double annealed for easy flaring TECH TIP
and bending. Coiled tubing does not include flare nuts A few helpful tips to help when flaring stainless steel
(sold separately). tubing and prevent splitting the line when flaring. Cut
ALL48040 .... 3/16" Standard Zinc, 25 Ft. with a hacksaw or cut-off wheel not a tubing cutter.
ALL48308 ..... 3/16" Stainless, 20 Ft. Using a step drill such a ALL11040, slightly chamfer the
ALL48326 ..... 1/4" Standard Zinc, 25 Ft. inside I.D. of the tubing. Using a bench grinder slightly
ALL48318 ..... 1/4" Stainless, 20 Ft. bevel the outside edge.
Gravel Guard
Brake Line Protector Line Clamps
Guard protects steel NEW! Choose from rubber cushioned ALL18300 ALL18310
ALL18301
ALL18311
and plastic brake lines aluminum, nylon or clamp-on
against possible damage caused aluminum in 3/16" and 1/4".
by gravel, rocks and other road/track debris. Zinc coated 3/16" Line Clamps
steel material is placed over tubing or brake line before ALL18300 ..... Rubber Cushioned
ends are installed. Sold in 8' long lengths. Aluminum, 10-Pack ALL18320
ALL18310 ..... Nylon, 10-Pack ALL18321
ALL48330 ..... 3/16"
ALL48332 ..... 1/4" ALL18320 ..... Clamp-On Aluminum, 4-Pack
1/4" Line Clamps
ALL18301 ..... Rubber Cushioned Aluminum, 10-Pack
ALL18311 ...... Nylon, 10-Pack
ALL18321 ..... Clamp-On Aluminum, 4-Pack
www.allstarperformance.com 33