Page 34 - 2018 Allstar Performance Parts and Equipment Catalog

BRAKE Dirt Race Car Brake Line Kit Deluxe Nylon

Kit allows braided lines to be run
throughout a dirt race car. Includes all lines
Deluxe kits feature push lock fittings
needed to Brake Line Kits
to ease installation. Kits include 30
reach from feet of line and fittings. Not for
the calipers to inside the foot street use.
box. Due to brand prefer-
ence and location of ALL48018 ..... Kit For Use Without
Brake Gauges
pedals, master cylin- ALL48019 ..... Kit For Use With Brake Gauges
ders and brake
shut off, the Replacement Fittings
specific ALL48020 ..... 1/8"NPT Male To Push Lock Hose ALL48023
fittings ALL48021 ..... 1/8"NPT Female To Push Lock Hose
and lines ALL48022 ..... Plastic T - All To Push Lock Hose
to complete ALL48023 ..... Plastic T - (2) Push Lock, (1) 1/8"NPT
plumbing ALL50184 ..... 1/8"NPT Male Union, 4-Pack ALL48020
inside the foot Nylon Brake Line Kit
box area will
need to be purchased separately. ALL48030
Concerned about brake pressure? This kit uses #3 line Quickly plumb any race car using
with -4AN ends. The #3 line size offers a stiffer pedal feel an Allstar nylon brake line kit. Kit
while utilizing the more popular -4AN ends. extends from the master cylinder to
the caliper and includes 35 feet of
ALL42052 ..... Kit For Dirt Modifieds With OEM Calipers 3/16" line, compression ends, unions,
ALL42053 ..... Kit For Dirt Modifieds With Aftermarket Calipers tees and 1/8"NPT fittings. Race proven
ALL42054 ..... Kit For Dirt Late Models With Aftermarket Calipers
for years. Not for street use.
Rear End Brake Line Kit Replacement Line
(Single Line Drop) ALL48026 ..... 10 Ft.
Kit is designed to eliminate ALL48027 ..... 50 Ft.
ALL48028 ..... 100 Ft.
“hanging” brake lines near the
rear calipers. Rear Brake Line Kits Replacement Brass Fittings
utilize a single line drop located For Nylon Brake Line Kit
near the left side ALL48032 ..... 1/8"NPT Straight
of the center ALL48033 ..... 1/8"NPT 90°
section. From the drop, the lines tee and run over the top back ALL48034 ..... 3/16" Male Union ALL48032 ALL48034 ALL48036
ALL48035 ..... 3/16" Male Tee
side of the center section, then across the backside of axle tubes ALL48036 ..... 3/16" Captured End Caps, 10-Pack
to the calipers. Kit includes braided lines (#3 line with -4AN ALL50040 .... Caliper Fitting 10mm-1.5 Male To 1/8"NPT
ends), -4AN tee, 3" axle tube clamp bracket and a tee bracket. Female 2-Pack (Not Included In Kit. Needed
ALL42056 ... Kit For Dirt Modifieds (60" Wide) With OEM Calipers For Use With Metric GM Calipers To Nylon Brake Line)
ALL42057 ... Kit For Dirt Modifieds (60" Wide) w/Aftermarket Calipers
ALL42058 ... Kit For Dirt Late Models (62" Wide) w/Aftermarket Calipers Braided Steel Lines
A wide selection of braided
Front End steel lines in various
Brake Line Kit lengths. All lines come
Kits include braided lines with one straight end
to reach from the front and your choice of
calipers to inside the straight, 45° or 90°
foot box. Braided on the other end. The inner
lines are #3 size PTFE hose is compatible with
with -4AN all brake fluids. The braided stainless steel outer cov-
ends. The ering resists abrasion and corrosion. Ideal for use where
#3 line size bending and flexing occur. More durable than rubber
offers a stiffer hose.
pedal feel while See Page 114 and 115 in the Fittings & Hoses section
utilizing the more popular -4AN ends. for a complete listing of braided steel lines.
ALL42060 ..... Kit For Dirt Modifieds With OEM Calipers
ALL42061 ..... Kit For Dirt Modifieds With Aftermarket Calipers
ALL42062 ..... Kit For Dirt Late Model With Aftermarket Calipers ALSO NEW COATED LINES ON PAGE 7!
Note: Visit our website for specific components used in these kits!
32 www.allstarperformance.com