Page 806 - Chief Architect Reference Manual

Chief Architect X10 Reference Manual

Roof Baseline Panel
The settings on the ROOF BASELINE panel selected edge of the Roof Baseline Polyline.
control the roof directives associated with the See “Selected Edge” on page 214.

1 Specify the Baseline height, which is • Specify the Pitch for the selected edge of
the height of the entire Roof Baseline the Roof Baseline Polyline. This over-
Polyline, not just that of the selected edge. rides the default pitch set in the Build
See “The Baseline” on page 789. Roof dialog. See “Build Roof Dialog” on
page 780.
2 Roof Options -
• The Pitch, Upper Pitch, Starts at
Height, and In from Baseline settings are
• The first four checkboxes: Full Gable the same those in the Wall Specification
Wall, High Shed/Gable Wall, Knee dialog.
Wall, and Extend Slope Downward are
the same as those in the Wall • Baseline height - This is the height of the
Specification dialog. See “Roof Panel” entire Roof Baseline Polyline, not just
on page 395. that of the selected edge. See “The Base-
line” on page 789.
• Check Against Wall if the roof plane ris-
ing from this baseline butts against an
exterior wall. This is similar to checking Polyline Panel
High Shed/Gable Wall. The POLYLINE panel states the length of the

3 Pitch Options - Roof Baseline Polyline’s Perimeter and its

806