Page 121 - FreesStyler® Installation and Startup
P. 121
®
INSTALLATION AND STARTUP
Chapter 7 Treadle Assembly
Treadle Assembly
The Treadle and the “Y” Section must be bolted together first.
1) Lay the Vector™ Treadle and the “Y” Section on a flat surface, in line with each other. If you have purchased the
Plastic Sleeve option, slide them into place now.
2) Secure the two sections together by aligning the stainless steel Treadle Axels to the female holes in the “Y” Section
(vertical) mounts as shown below.
CAUTION
The bolts shown above MUST be installed with the nuts on the exit side!
Vehicle
Travel
Nuts MUST face exit side of Treadle
1MANUL220 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 7-1
