Page 12 - Kondor® KL 1 - E-1063 Programming and Operation Manual

®
KL1: 1063 PROGRAMMING AND OPERATION

Chapter 1 Operator Interface/Standard User Screens

User

User / About

E-1063 Screen Key
· The number displayed to the right of “Screen
Software” shows the version of software in your
Operator Interface
· The number displayed to the right of “Logic
Software” shows the version of software in your
Controller (PLC).

Wash Data: has been provided as a way to view what is in the “Wash Data” screen without any reset capability.

Faults

E-1063 Screen Key
· The ovals are ON/OFF indicators.
· A filled oval indicates that the Fault is active.
· Reset: Resets and Homes machine
· Alarms: Move you to the Alarm screen
· Clear Alarms: Resets alarms shown on the Alarm
screen
· More: Moves you to the Capture screen

This screen displays a current Fault status on the system. The oval next to a particular Fault will be filled when that
Fault is active. This screen also displays a numerical Fault status of the system, which matches the 4-digit “Error
Code” that will be sent to a pager when a Fault occurs.

The “DRIVE CODE” field is covered on the next page.
Note: FAULT status 255 is for “System Ok”.

Note: COLLECT ALL FAULT DATA FROM THIS SCREEN BEFORE RESETTING THE
WASH.

Note: See Chapter 6 for Fault Information.

1-4 Belanger, Inc. ®* PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL126