Page 9 - Kondor® KL 1 - E-1063 Programming and Operation Manual

®
KL1: 1063 PROGRAMMING AND OPERATION

Chapter 1 Operator Interface/Standard User Screens

Queue

E-1063 Screen Key
· The row of boxes displays the ten packages in the QUEUE. The
display will be 0 if nothing is present
· The field to the right of the arrow is where you will enter the next
available Package.
· “Loader” shows the wash that is being evaluated to Load.
· “Wash” shows the vehicle that has been pulled from Loader.
Typically this occurs when the vehicle has entered the Photo-Eye
beam.

The Queue keeps track of the packages that each vehicle will receive. It can keep track of up to 10 vehicles at a
time. Package selections can be entered into the “Queue” from the screen ONLY. The POS will enter selections
directly into the Loader.
Values entered into the Queue will be inserted to the right of the last position entered. If a package is the first
entered into the Queue, it will be inserted into the left most position. As washes are used, the Queue will shift all
packages to the left one place until all washes are shifted into the Loader.

Note: The POS will NOT use the QUEUE; it will insert selections directly into the
Loader.

When the system is ready to accept another vehicle into the wash, the Loader will be shifted into wash if the
Entrance Operation 1 “On Condition” is met.
Entrance Operation 1 will need to be configured even if it is not used in wash packages.

Note: See Entrance Operation 1 for conditions to move a package from the Loader to
the wash.

Data

E-1063 Screen Key
· The middle column displays a total of each package used since
the last package reset.
· The Today Column displays a total of each package used since
midnight.
· The Total Field displays a total of combined packages until a
“Total Reset”.
· The Cycles Field displays a total of combined packages that are
“Non Re-settable”.

The middle column shows an accumulation of packages since the last time the Package Reset was pressed.
The “Today” column shows an accumulation of the packages since midnight.

Pressing “Reset All” will clear the values of the total data and package data accumulated since Reset All was last
pressed.

1MANUL126 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1-1