Page 12 - Tunnel Support Components

TUNNEL SUPPORT COMPONENTS

Installation

Hydraulic Unit Overview

The Hydraulic Supply Units come with a premium Variable Volume Pumps. When adjusting the speed
of a piece of equipment, the speed of other components will not be affected unless the maximum supply
capabilities are exceeded. The pump throttles itself to only displace the required amount of oil.
CAUTION

This unit should NEVER be used to run only a Conveyor. This will cause overheating and
damage the unit.
There are three available Hydraulic Supply Units, the 5HP unit, 10HP unit and the 20HP unit. The
number of components determines the size required in the system and/or the specifics of those
components.
The 5HP Hydraulic Unit is a fixed displacement and should be purchased when extra capacity is
required. The Enduro Class 60 comes standard with a 10HP Unit and the Pro Class100 comes with a
20HP unit.
It may become necessary to upgrade your system from a 10HP to a 20HP hydraulic unit or add an
auxiliary hydraulic unit if you add components to your system at a later date. If you have questions about
your systems hydraulic capacity, consult your local VAR.
Of the two variable displacement units there are some distinct differences. The 20HP unit has larger feed
and return manifolds.
CAUTION

Do Not exceed 1000 PSI operating pressure on ANY systems Hydraulic Unit. Failure to stay
within limits will trip the Motor Starters.

Placement
Place your Hydraulic Unit in the desired location and bolt it to the floor. Be sure it is in a safe and dry
environment.

10 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL760